Mosfet HF inverter technolgy
Single phase power supply, Fuse 14.7/20.7A
Light weight.
HF arc start for TIG, arc force for MMA
2T/4T and pulse control function for TIG
AC/DCTIG suitable for steel, stainless steel, aluminm.
Digital display
Can be with foot controller.
Welding cable 3m+300A holder, welding cable 3m+300A earth clamp, TIG torch 4m, gas hose 2m.
Over hot and current protection.
Input Voltage: 1X220/230/240V 50/60Hz Input Power: 3.5KVA
No load Voltage: 62 Current Range: 5(10A AC)~160A
Duty Cycle: 60% PRO-gas flow time: 0~1s
Gas post flow time: 1~10s
SP Value(Balance): 10~90%
| Category Name | Subcategory Name | Active | Length | Â Width | Â Height | Weight |
| MMA / TIG Machines | TIG AC/DC Machines | 1 | 493 | 330 | 320 | 23 |
Mosfet HF inverter technolgy
Single phase power supply, Fuse 14.7/20.7A
Light weight.
HF arc start for TIG, arc force for MMA
2T/4T and pulse control function for TIG
AC/DCTIG suitable for steel, stainless steel, aluminm.
Digital display
Can be with foot controller.
Welding cable 3m+300A holder, welding cable 3m+300A earth clamp, TIG torch 4m, gas hose 2m.
Over hot and current protection.
Input Voltage: 1X220/230/240V 50/60Hz Input Power: 3.5KVA
No load Voltage: 62 Current Range: 5(10A AC)~160A
Duty Cycle: 60% PRO-gas flow time: 0~1s
Gas post flow time: 1~10s
SP Value(Balance): 10~90%
| Category Name | Subcategory Name | Active | Length | Â Width | Â Height | Weight |
| MMA / TIG Machines | TIG AC/DC Machines | 1 | 493 | 330 | 320 | 23 |
A telescoping hydraulic system is an essential component of a Tower Crane. It allows the crane to extend and retract its boom, enabling it to reach different heights and distances. This system consists of several hydraulic cylinders, valves, and hoses that work together to provide the necessary power and control.
The main hydraulic cylinder in the telescoping system is responsible for extending and retracting the boom. It is typically a double-acting cylinder, meaning it can generate force in both directions. This cylinder is connected to the base of the crane and extends vertically to support the boom.
To control the movement of the hydraulic cylinder, various valves are used. These valves regulate the flow of hydraulic fluid into and out of the cylinder, allowing for precise control of the boom's extension and retraction. The valves are typically operated by the crane operator using a control panel or joystick.
The hydraulic system also includes hoses that connect the cylinders and valves. These hoses transport the hydraulic fluid, which is typically oil, between the different components. The hoses must be durable and able to withstand high pressure to ensure the safe and efficient operation of the crane.
In addition to the main hydraulic cylinder, there may be secondary cylinders in the telescoping system that provide additional support and stability to the boom. These cylinders are typically smaller and are used to fine-tune the position and angle of the boom.
Hydraulic Pump Station,Telescoping Cage,Tower Crane Cylinder,Axial Plunger Pump,hydraulic pump unit
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytoplesstowercrane.com