Under the influence of the rapid development of science and technology and the diversified market demands, dryers are constantly innovating. Here is an example of a new type of drying technology developed through "technical promotion" and "market traction." Dryer product innovation technology to promote:
1, microwave, high frequency, induction, ultrasonic drying
2. Pulse Combustion Drying: Pulse Combustion Drying Technology is first used in propulsion devices and then applied to combustion
3, vibration bed drying: initially used for the transportation of granular materials
4. Collision flow (relative injection): The earliest application to the hybrid, combustion dryer product innovation market:
1. Superheated steam drying: energy efficiency improvement, output quality improvement, environmental impact reduction, safety, etc.
2, pulse drying condensation belt drying (also need technology to promote)
3. Spray-fluid bed combined drying: to improve the economics of spray drying
4, intermittent drying (increased efficiency)
List examples of new drying technologies that have been developed through "technical promotion" and "market traction." In some cases, it is impossible to clearly demarcate these two types, because the development of “market traction†may require “technical promotion†to succeed. Therefore, "technical promotion" and "market traction" are all indispensable in the continuous innovation of the dryer.
Hospital Medical airtight Sliding Door
The medical automatic door is a door that is generally installed in the operating room or the ICU ward for the medical staff to push in and out of the hospital bed. The medical automatic door has the function of inductive opening and safety anti-pinch. The medical staff only needs to extend the foot into the light control foot sensing box next to the entrance, and the door will automatically close.
After a period of time, the door will automatically close after the cart and medical staff have fully entered. If someone or a cart is next to the door leaf, the door will not close to provide a safe anti-pinch. In addition, the door frame of the medical automatic door is made of sealed profile, which has the characteristics of high air tightness; the light control foot sensing is adopted for the entrance and exit, so that the medical staff can open the door [without contact", which can effectively isolate the bacteria and personnel.
If you are interested in our products, please kindly contact us
hospital door,medical sliding door,automatic medical airtight doors,hospital automatic sliding airtight door,hermetic airtight shielding door
SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahsrud.com