Eaton released the industry-leading vehicle power management solution at the Shanghai Auto Show on April 20, demonstrating its innovative results in improving vehicle efficiency, reliability and safety.
“Eaton has long been committed to providing innovative products and solutions for engine and vehicle manufacturers to help them improve fuel economy and reduce emissions. At the same time, we are gradually replacing traditional technologies with a view to setting new benchmarks for the industry.†Eaton Vehicle Group Scott Adams, senior vice president of global product development, marketing and planning, said.
Eaton Shanghai Auto Show Booth
Eaton’s products and solutions on display include UltraShift PLUS Mechanical Automatic Transmission (AMT), Electrostatically Driven Mechanical Automatic Transmission (EV AMT), Advanced Valve Drive Systems, Hollow Engine Valves, Engine Deactivation Systems, and Traction Improvers , fuel emission management systems, fluid delivery systems, and superchargers.
The Eaton booth is located at 5BC151, Hall 5.2 of the National Convention and Exhibition Center (Shanghai). Eaton’s advanced technologies and products in this exhibition are in line with the development trend of the local vehicle market and help manufacturers from passenger car, bus and passenger transport, long-distance tractors, construction vehicles and urban fast logistics to provide safety for their customers. Reliable, clean energy vehicles.
Eaton Mechanical Automatic Transmission
A highlight of Eaton’s exhibits is the 4-speed mechanical automatic transmission (EV AMT) for pure electric drive systems. This product was led by the Eaton China team and was jointly developed by Shanghai Electric Drive Co., Ltd., China's largest supplier of new energy vehicle drive system solutions, designed specifically for the large and medium-sized bus passenger transportation market in China. The product integrates a mechanical automatic transmission with a drive motor. Compared to a conventional direct drive solution, the pure electric drive system uses an optimized mechanical automatic transmission to improve fuel economy by optimizing system control without affecting the vehicle. Acceleration performance.
Other highlights of Eaton’s auto show include:
Engine brake
Eaton engine braking systems provide valve drive system solutions for heavy-duty vehicles, combined with advanced variable valve actuation systems (such as Miller/Atkinson) to switch between driving mode and engine braking mode. Compared with similar products on the market, Eaton’s technology performs better when the engine is running at a lower speed and is compatible with standard production lines.
Cylinder deactivation system
Eaton cylinder deactivation system makes the engine more flexible and efficient - the cylinder of the engine can be smoothly run or cylinder deactivated within milliseconds as needed. Eaton cylinder deactivation is the most direct way to reduce CO2 emissions today, and it can also improve fuel economy by driving cycles. When the engine does not need full power operation, it will perform a cylinder deactivation operation on the engine. In this way, the remaining working cylinders will operate in a more efficient mode, thereby improving fuel efficiency and reducing emissions.
Vehicle refueling oil and gas recovery system
Eaton vehicle fueled oil and gas recovery system is a vehicle emission control system. It can collect the fuel vapors that evaporate from the fuel tank during the refueling process and burn in the normal way, thereby reducing about 95% of the hydrocarbon emissions during the refueling of the vehicle (this discharge accounts for 50 percent of the annual total of automotive hydrocarbon emissions. %).
Eaton Shanghai Auto Show Booth Products
Differential and Traction Improver
Eaton offers a full range of differential and traction improvement devices including differential locks, automatic differential locks, and electronic differential locks to maximize engine power and wheel traction. Among them, the Eaton ELocker electronic differential lock can be operated as an open differential before activation. At the moment the button is pressed, the differential lock locks the axle 100%. The Eaton ELocker electronic differential lock can be used for front and rear wheel drive of the vehicle, which greatly improves the traction and thus improves the running performance of the vehicle.
“China is facing many serious environmental and energy challenges, and the demand for new energy-saving solutions is becoming more and more urgent,†said Liu Hui, president of Eaton’s China office and president of Eaton Hydraulics and Vehicles Asia Pacific, “Eaton. With expertise in the vehicle sector, we are working hard to apply our expertise to improve power efficiency while reducing carbon emissions.â€
The ZLT series mixing transferring barrel is researched and developed by our company on the basis of absorbing advanded pharmaceutical production processes in Western Europe. It is suitable for transferring materials of closed production processes in pharmaceutical enterprises. The barrel meets the GMP requirements and stores medicines in a closed, safe manner without dampness, featured by convenient use and beautiful appearance.
Features:
1. The barrel is made of 304 stainless steel or 316L.
2. The barrel is of square concial shape. The external walls are subject to matte treatment and polishing treatment with beautiful appearance.
3. The barrel upper cover and lower cone are formed through pressing by using special molds. The bends are subject to arc transition without dead corners.
4. The polishing precision of internal walls of the barrel reachers surface roughness Ra0.2um.
5. All welding points of the barrel are subject to chamfering treatment and argon arc double-sided welding process. All weld seams are subject to grinding treatment. The welding quality meets the stipulations in JB4708 and JB4709.
6. The feeding port of the barrel is manufactured by adpoting the drawing process. The upper cover is formed through punching by using special molds, and embedded with silicon rubber oring.
7. The barrel is provided with the stainless steel butterfly valve with safety device, which has such features as food sealing performace, no water leakage, flexible operation, good safety and reliablity.
8. The barrel has sufficient strength. Its wall thickness meets the requirements for loading capacity. There will be no deformation.
Mixing Transferring Barrel,Mixing Bucket,Pharmaceutical Mixing Bucket,Mixing Pail
Jiangyin Jirui Machinery Manufacturing Co,LTD , https://www.jyjiruimachine.com