First, the application object
1.1 Products: Dry salt/tidal salt (white particle NaCl)
Second, the process data
2.1. Process Type: Belt Conveyor
2.2. Installation location: downstream of tide salt outlet
2.3. Product flow rate: 1.2~1.5t/h
2.4. Height of the product on the sensor: 3 to 12 cm (floating with salt level)
2.5. Moisture Measurement Range: 1.9% to 2.5% Display Range 0% to 20%
2.6. Material Temperature: 60°C to 120°C
2.7. Ambient temperature: 40°C to 60°C
2.8. Features: High density, hot air dryer outlet temperature 80 ~ 120 °C, the entire line of water vapor is larger.
Third, the calibration data
3.1 Calibration point 1: Number: 820891 Mass percentage: 0 %
3.2 Calibration point 2: 1# Number: 454091 Mass percentage: 2.20%
3.2 Calibration point 3: 2# Number: 485499 Mass percentage: 1.43%
3.3 Calibration Point 4: 3# Number: 476284 Mass Percentage: 2.66%
3.4 Calibration Point 5: 4# Number: 476284 Mass Percentage: 2.66%
3.5. Accuracy: ±0.02%
3.6. Display Range: 0~20% M
Fourth, sensor data:
4.1 Sensor Type: FMS400C
4.2 Sensor Surface Materials: Ceramics
4.3 Magnification: Factor 1
V. Use results:
5.1. 4-20mA Signal Purpose: Humidity Control
5.2. Initial state:
5.3. Costs and Benefits: Before Use: Low Product Moisture Content After Low Use: Effectively Control Water Content Increase Production Capacity
5.4. Quality benefits: Before use: Larger moisture content after use: Constant moisture content and compliance criteria
5.5. Remarks:
The on-line real-time detection of the moisture content of the tidal salt in the line, strictly controls the moisture content of the tidal salt after drying to between 2.5% and 3.0%, optimizes the automatic control system, improves the production efficiency, and thus achieves an effective cost saving. . Effective control of water content is beneficial to increase the production capacity of the production line. Will directly expand the production efficiency of enterprises.
For iron scraps, whether it's turnings, chips, filings, shavings, cuttings, sawdust, drillings, borings, debris, granules or sludge, Ecohydraulic iron recycling machine can help. If your scraps are small chips, you can choose our Iron Briquette Machine to press your chips to be small blocks. If your scraps are shavings or turnings, you can choose our Iron Baler to press your chips to be square bales, if your scraps are big like pipe tube sheet plate rebar, etc., you can choose our iron shear to cut your scraps to be smaller pieces.
Iron Shavings Recycling Machine, Iron Turnings Recycling Machine, Iron Scraps Recycling Machine, Iron Chips Recycling Machine, Waste Iron Recycling Machine
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecobriquetter.com