For a large company, without a strong service team, providing users with comprehensive and thoughtful services is simply unimaginable. Details:/
We all know that our metal cutting uses a metal laser cutting machine, but novices do not know how to operate it, do not know how to cut, the following is the cutting step, I hope everyone can seriously study.
1: Prepare the material to be cut and fix it on the workbench.
2: According to the material and thickness, call the appropriate parameters.
3: Select the appropriate lens and nozzle according to the cutting parameters, and check whether it is intact.
4: Adjust the cutting head to the proper focus.
5: Metal laser cutting machine inspection and adjustment nozzle centered.
6: Calibration of the cutting head sensor.
7: Check the cutting gas, input the command to open the auxiliary gas, and observe whether it can be ejected from the nozzle well.
8: Material test, inspection of the cross-section, adjustment of process parameters until the production requirements are met.
9: The cutting program is prepared according to the drawing of the workpiece and imported into the CNC.
10: Move the cutting head to the starting point of the cutting and press "Start" to execute the cutting program.
11: The operator must not leave the machine during the cutting process. In case of an emergency, quickly press: "reset" or: "emergency stop" to terminate the operation.
12: When cutting the first workpiece, pause the cutting to see if it meets the requirements.
13: When checking, check the flow of auxiliary gas. If the gas is insufficient, replace it in time.
After reading the above metal laser cutting machine is not operating it, and writing is also very detailed, so that we can easily operate, even without the master to take us, they can operate.
[Chinese cutting machine trading network is now in order to better carry out cutting machine transactions for various companies, special free advertising space, please visit the official website to learn the latest information :/]
Editor: zgqgjjywzhd
Our Telecommunication Tower are made from quality sheet through bending, forming, automatic welding and hot galvanization. We can reach one-run machining length of 14m and can bend sheet of thickness up to 45mm. We adopt advanced welding procedures, automatically weld main joints and reach rank-II welding quality.
We have supplied 2400ton 132kV and 220kV transmission line steel pole to WAPDA. Pakistan on 2008 and have supplied 1200ton 138kV transmission line steel pole to Davao light, Philippines on 2009.
Telecommunication Tower, Telecommunication Steel Tower, Telecom Steel Tower, Telecom Steel Mono Tower
Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.steelpolejl.com