Model NO.: Waste Incinerator
Working Temperature: 850~1150
Negative Pressure: 5-35 mm Wc
Electrical Power: 7kw
Total Weight: 1500kg
Certificate: Uscg/CCS/RS Marine Waste Incinerator
Warranty: 3 Years
Trademark: Gathering Marine Waste Incinerator
Transport Package: Standard Package
Specification: 180000Kcal/H, 22.5kg/h
Origin: China
HS Code: 8417809090
Marine Waste Incinerator for Marine ship use

Marine Waste Incinerator Description :
The Gathering marine incinerator, which is designed for on board incineration of ship's waste oil and solid, it mainly consists of four parts: 
A. Combustion chamber with diesel oil burner, sludge burner, and electric control panel. 
B. Flue gas fan 
C. Flue gas damper. 
D. Sludge tank with circulating pump and heater. 

Marine Waste Incinerator Details: 
The incinerator is equipped with single door in front, which are intended for loading 
Of solid waste and ash removing, the incinerator in stand-by mode(COM. Tem. Less than 220° C), the doors can be opened properly. If the incinerator is running in cooling down mode, the door can be opened till COM. Tem. Less than 100° C and incinerator fully stop. 

The electrical control panel is installed on the incinerator and it contains fuses, starters, PLC and 
Operator panel. The electric panel is built according to international standards for marine equipment. 

The operator panel which is located at the right side of the control panel has a touch screen and 
Defined keys for system starting/stopping and selecting burner modes. The burning process is controlled by the PLC and monitored by the HMI(human machine interface)and scanned by a photo resistor. The combustion chamber temperatures are also regulated automatically by the PLC control system.

Marine Waste Incinerator Technical Data:

Type 		HY INC-18  
Capacity 180,000 kcal/h ( 208KW)
22.5 kg/h IMO sludge oil
14,4000Kcal/h solid waste		 IMO sludge (20% water content) IMO class 02 solid waste
Combustion chamber temperature Max.           1180 8C Working        850-1150 8 C  
Flue gas temperature Max.            375 8C Working         250-340 8 C  
Surface temperature Less than ambient temperature +20 8 C , and less than 60°C  
Electrical power Consumption 7kW  
Negative pressure 5-35 mm WC Negative pressure in combustion chamber
Total weight 1500 kg  
Outline dimension   See dimension drawing (APPENDIX)
 

Marine Waste Incinerator for Marine Ship Use
Marine Waste Incinerator for Marine Ship Use
Marine Waste Incinerator for Marine Ship Use
Marine Waste Incinerator for Marine Ship Use

Stamping (also known as pressing) is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape. Stamping includes a variety of sheet-metal forming manufacturing processes, such as punching using a machine press or stamping press, blanking, embossing, bending, flanging, and coining.This could be a single stage operation where every stroke of the press produces the desired form on the sheet metal part, or could occur through a series of stages. The process is usually carried out on sheet metal, but can also be used on other materials, such as polystyrene. Progressive dies are commonly feed from a coil of steel, coil reel for unwinding of coil to a straightener to level the coil and then into a feeder which advances the material into the press and die at a predetermined feed length. 


Stamping is usually done on cold metal sheet. See Forging for hot metal forming operations.


NINGBO RUICAN MACHINERY COMPANY can offer the Stamping Parts per the drawings or samples.

Stamping Parts

Stamping Parts,Metal Stamping Parts,CNC Stamping Parts,Stamping Bending Welding Parts

Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.kstcasting.com