Complying with the “five” requirements of Dongfeng Company, and constantly upgrading and transforming products, Dongfeng Dana Axle Co., Ltd. has been on the road.

In July of this year, the company's pure electric axle EP-Axle6 completed the bench test, successfully carried a 4.5-ton city light truck logistics vehicle, carried out the vehicle test, and realized sop (transition judgment), which means that the company is in the electric axle. On the road for many years, the final vector production has taken a big step. This product will be completed in Dongfeng Suizhou Special Purpose Vehicle Co., Ltd., and then launched to the market.

Dongfeng Dana Axle Booth

Our EP-Axle6

“The concept prototype of the pure electric axle EP-Axle6 was actually developed at the beginning of 2017, and it participated in the 2017 Beijing Road Transport Exhibition in May of that year. It has attracted much attention.” 6m unmanned pure electric city bus in Shenzhen Cars, as well as Dongfeng commercial vehicles, etc. for user experience. Zhang Buliang, Director of Product Development Center of Dongfeng Dana Axle Co., Ltd. made such an introduction.

As one of the fourth generation of pure electric drive axle series developed by Dongfeng Dana Axle, EP-Axle6 is a 6-meter pure electric bus and GVW 4.5-ton pure electric city logistics. The ideal standard for the car. Compared with the previous products, EP-Axle6 power system is highly integrated, which is convenient for vehicle battery layout; high motor speed, small size, low weight of drive system assembly, high power density; direct drive of motor, greatly improving transmission efficiency; The gear design improves the anti-vehicle feeding capacity and the economy of the whole vehicle; the enhanced water cooling system increases the cooling capacity by 20%; the motor and the reducer are assembled independently, and the maintenance and replacement are convenient; in addition, the motor temperature sensor and the motor speed sensor are provided. , ABS, etc.

Always insist

As a leader of joint ventures and new energy axles, Dongfeng Dana Axle Co., Ltd. relies on the advanced technology platform of its parent company Dongfeng and DANA (Dana) and its strong R&D strength to seek safe and comfortable passenger cars. Environmental protection and convenience are our mission, focusing on developing products that meet and lead the market.

"Electricity of the axles, as early as 2014, we put forward a strategic concept, but at that time, the talents were stuck, and through recruitment and dispatching, until 2016, the relevant technical routes became clearer." Zhang Buliang said. Although the road is difficult, but the direction is fixed, it must go forward. The company spent nearly two years to gradually solve the problem of talent and R&D funds leaning toward new energy sources, paving the way for the launch of the EP-Axle6 concept prototype and vehicle loading.

The direction of our development

This year, Dongfeng Dana Axle will also launch three platform prototypes: EP-Axle 4, EP-Axle8 and EP-Axle12, EP-Axle 4 is mainly used for light logistics light trucks, EP-Axle8 is 8 meters pure electric city bus The ideal standard for passenger cars, 7-meter pure electric tourist buses and GVW 12-13 tons of pure electric city logistics vehicles, EP-Axle12 is suitable for 12-meter passenger cars, low-floor electric buses adapted to the future aging trend.

In addition, as the main development plan for next year, EP-Axle10 is currently cooperating with Dana in the US and Europe. The vehicle application planning and docking work are also in progress. This product will be widely used in GVW17-19 tons of urban logistics and cities. Sanitation vehicles and 10m series city buses.

Jin Renyong, general manager of Dongfeng Dana Axle Co., said that the launch of these new products will greatly meet the needs of market safety, comfort, energy saving, environmental protection and customization and diversification, and promote the transformation and upgrading of Dongfeng Dana Axle; For the whole vehicle customer, the use of new products such as EP-Axle6 can further improve the economy and reliability of the vehicle.

Reading volume: Source: Dongfeng Dana Author: Siri

Plastic Film Lamiantion Machine

This machine laminates plastic film or Kraft-paper on the surface of PP or PE woven fabric with the adhesive material at melting status, or laminates color-printed OPP, CPP film to produce compounded bags.
This machine is highly automatic featured in advanced workmanship, easy operation, low power-consumption and high efficiency. It adopts double extrusion-dies with compounded double-roller to make even compounding. Its finished products are all high intensity and good performance both in application and appearance. This machine is equipped with auto-correcting device for auto guiding and sending processed material. It is speed-adjustable, easy to operate and adaptable to various sizes of compounded bags.

Plastic Film Lamiantion Machine,Bopp Lamination Machine,Plastic Polyethylene Film Blower,Nonwoven Plastic Film Laminating Machine

Zhejiang Sanlong Universal Machinery Co.,Ltd. , https://www.sanlongmachinery.com