Its Linbeier MH-3000A infrared inoculant sterilizer was quoted at RMB 1360-1575 in Shanghai and RMB 1350-1575 in Guangdong. Its Linbeier MH-3000B infrared inoculant sterilizer was quoted at 1560-1950 yuan in Shanghai. Product introduction:
Infrared inoculation ring sterilizer is sterilized by infrared heat, because it is easy to use, simple to operate, no open flame, not afraid of the wind, safe to use, can be widely used in biological safety cabinets, purification table, exhaust fan, mobile vehicles and other environments Microbiological experiments were conducted.
MH-3000A infrared inoculation sterilizer features:
1. Safe and convenient disinfection and sterilization with ring or needle, completely replace the alcohol lamp 2. The temperature in the heating hole can reach above 850°C, sterilization only takes 3 to 5 seconds 3. It is suitable for inoculation ring/inoculation needle and nozzle/bottle The mouth and other items are sterilized at high temperatures. 4. The device can be used in anaerobic chambers. 5. The maximum temperature of 930°C±30°C can be reached within 12 minutes of starting.
6, in the depth of the ceramic funnel pipeline ashing organic material to prevent infectious splashes and cross-contamination 7, stepless adjustment temperature range: room temperature plus 15 °C to 930 °C
MH-3000A infrared inoculation sterilizer parameters:
1, the center of the highest temperature: 825 °C ± 50 °C
2. Maximum sterilized article outside diameter: Item ≤14mm 3. Heater adjustable angle: maximum depression angle 45°, maximum elevation angle 75°
4, Overall dimensions: length x width x height = 150x102x180mm
5, power supply: AC220V ± 22V, 50Hz ± 1Hz, 135W
6, total: 1.3Kg
MH-3000B infrared inoculation sterilizer parameters:
1, the highest temperature in the center area: 930 °C ± 30 °C
2. Maximum sterilized article outside diameter: Item ≤ 35mm 3. Heater adjustable angle: maximum depression angle 45°, maximum elevation angle 75°
4. Overall dimensions: length x width x height = 150x195x210mm
5, power supply: AC220V ± 22V, 50Hz ± 1Hz, 135W
6, the total: 1.6Kg
We have got 220kV Transmission Line Substation Structure Quality Certificate from Power Industry Steel Tower Qualified Inspection & Test Center from 2001 year. Our products are made from quality sheet through bending, forming, automatic welding and hot galvanization. We can reach one-run machining length of 14m and can bend sheet of thickness up to 45mm. We adopt advanced welding procedures, automatically weld main joints and reach rank-II welding quality.
Substation Structure, Substation Steel Structure, Steel Tubular Substation Structures, Steel Structure For Substation
JIANGSU XINJINLEI STEEL INDUSTRY CO.,LTD , https://www.steelpolejl.com