Last year, the domestic auto market continued to maintain a double-digit growth trend. Under the favorable background, not only the performance of automakers rose, but also the performance of parts companies also rose, and the overall performance was better than the whole vehicle.
According to the data compiled by Gasgoo.com, the performance of domestic mainstream parts and components companies has risen sharply. China's 20 mainstream parts and components enterprises' total revenue last year was 297.600 billion yuan, a year-on-year increase of 13.6%; net profit climbed from 15.135 billion yuan to 19.372 billion yuan, a year-on-year increase of 28%, and the increase was higher than that of vehicle companies. Its average net profit margin increased significantly, up 0.7 percentage points year-on-year to 6.5%.
Among the enterprises counted in this article, the net profit of most enterprises rose, a total of 17 companies, accounting for more than 80%, while only three companies fell.
Among the enterprises with more than 80% of the company's performance and rising net profit, FAW Fuwei's net profit increased the most. Last year, its revenue reached 11.273 billion yuan, a year-on-year increase of 19%; net profit reached 553 million yuan, a year-on-year increase of more than half (50.9%).
Other net profit growth rates were also in Wanfeng Aowei, Ningbo Huaxiang, Zhongding and Weichai Power. The net profit of the four companies increased by more than 40% year-on-year. Among them, Weichai Power, which has the largest revenue, grew 36.6% year-on-year to 79.637 billion yuan, surpassing Huayu Automobile and becoming the largest component company in China; net profit reached 5.025 billion yuan, up 40.7% year-on-year.
The net profit of Sailong Jinyu, Weifu Hi-Tech, Wanxiang Qianchao, Fengfan and Huayu Automobile increased by 20%-40% last year. Among them, the scale and profit are second only to Weichai Power's Huayu Automobile. Last year, the revenue reached 73.973 billion yuan, a year-on-year increase of 6.0%, and net profit increased by 29.2% to 4.456 billion yuan.
It is worth mentioning that compared with other companies with net profit growth, Fengshen's net profit last year increased by 6.0% to 332 million yuan, but its revenue fell 4.3% year-on-year to 8.167 billion yuan.
The net profit of the three companies declined. The three companies with net profit lubrication were Shangchai, SJiatong and Tire A. Among them, Shangchai's net profit fell most obviously. Last year's net profit reached 150 million yuan, down 26.9% year-on-year, and its revenue fell 6.8% year-on-year to 2.775 billion yuan.
Followed by SJiatong, net profit fell 26.0% to 209 million yuan last year, and revenue was 3.988 billion yuan, down 14.2% from 4.65 billion yuan in 2013.é»” Tire A achieved 5.563 billion yuan in revenue last year, down 14.1% year-on-year, and net profit was 166 million yuan, down 4.3% year-on-year.

Automatic Sliding X-ray hospital Door

hospital door, hospital sliding door, medical sliding door , automatic medical airtigh door, clean room door ,operating theaters door

Hospital door

Medical sliding door , each door has a single whole steel plate , lined with aluminum profile inner frame and high strength honeycomb panels , surrounded by high quality stainless steel shut perfect treatment , high dimensional accuracy , closed surface made of high quality EPDM special rubber seal to be perfect seamless seal , Bao steel steel board used in all high-quality cold-rolled steel , the surface with high-quality weather-resistant color pure polyester electrostatic powder coating , its performance in line with GB5237.4-2000 standard (in line with European standards QUALICOA D), and the development of a variety of wood effect , Door Press (medical diagnostic X-ray emission prevention health protection requirements ) lining thickness corresponding stereotype . protective harness toward lining 2mmpb thickness , the thickness of the other 1mmbp protection , The vertical axis hinge design unique , different from the conventional hinge , changing the point of impact to avoid sagging door , making more durable protective door , you open smoothly

Automatic Medical Airtight Doors with airtight , Sound insulation , thermal insulation , fire protection , radiation protection

1 Using a small volume , high-power brushless DC motor , frequent opening and closing , also can be long-term trouble-free operation

2. The sides of the door equipped with professional vacuum airtight tape , using a unique compression technology to ensure the door when the door is closed with the close coordination to achieve reliable sealing effect

3. With foot switch and special handle , health care workers to open the door easily , when power outage it can be opened by handle

4. The Safety sensors can effectively prevent the clip people , also can be set to automatic door sensor drive from indoor

5. Also can be opened easily by a remote control

6. The user can set the sensor effects , the flexibility to set the sensor operation mode according to the doctor`s work habits and characteristics of various types of surgery , in order to achieve the best results

Designed for clean room environments such as hospital operating rooms , pharmaceutical production plants, precision equipment factories, food shop , laboratory access port

Technical parameters

Power Voltage : 220V/50HZ

Power consumption : <150w

Door weight :<200KG

Opening/Closing speed : 20-60cm/sec

Closed way: Auto/induction

Safety Light Beam Switch :

This is which accord with the European standards , with a completely interference immunity . Also accord with ESC standards and in line with the French government about the workplace regulations require automatic doors

Accord with German regulations concerning the outer doors of power starting

hospital door, hospital sliding door, medical sliding door , automatic medical airtigh door, clean room door ,operating theaters door

SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfarrd.com