Top Quality/Capacity Gas/ Ele Pancake Machine/ Thin Pancake Machinery/ Flat Pancake Machine (manufacturer)

• Type: Auto Spring Roll Sheets Machine/Machinery
• Voltage: 220V/380V/Customized
• Customized: Customized
• Service Abroad: Available for Technician
• Operation: Automatic Control by 1 -2 Person
• Trademark: SHENGXING
• Origin: Langfang City, China

• Application: Flour, All, Beans, Wheat, Starch, Rice flour
• Condition: New
• Warranty: 1 Year, Forever Service
• Payment: T/T, L/C
• Material: Stainless Steel (Except Special Parts)
• Transport Package: Export Plywood Box
• HS Code: 84388000

automatic pancake making machine/ pancake machine

 ( Real manufacturer/factory)

Contact: Anna

Tel: 0086-15530615177

 

1. Real professional factory/manufacturer.

     Our factory, has more than 20 years of experience. We are the only factory /manufacturer of 6QP series.

     We have users from more than 35 countries.

     Many trading companies from China or said factories ( mainly from Henan, Zhengzhou, Shanghai, Beijing, Guangzhou, etc) bring customers to our factory, testing the machine and sell. There are a lot advertisement of our machine on other B2B websites and exhibitions. All photos in our web are taken by myself.

2. 6QP series machine:

The whole series including 5 models, each model produce sheets/pastries in different sizes, shapes, thickness and capacity, with different prices. But basic operation and function of each model is almost the same.

4. Function of 6QP series machines:

  Can automatically produce spring roll pastry, samosa pastry, lumpia wrapper, Lumpia pastryies/ sheets, crepes,    pancake, injera and Pecking duck wrapper with various recipe. (Clarify: 100% starch rice paper not OK.)

5. Advantage of 6QP series machines:

   1) Thickness of the pastry is changeable from 0.2-2.0mm, depend on exact recipe proportion.

   2) Shape of the pastry can be customized in round, square, rectangular, oval or other shapes.

   3) Size of pastry can be from 5.0--60cm, depend on exact model.

6. Basic operation process:

     ----Mixing liquid batter ( wheat flour, water, or other raw material) with mixer

     ----batter is pumped from batter container to nozzle

     ----forming and baking automatically

     ----separate cooked pastry from cylinder

     ----cutting to required sizes( round shape no need )

     ----cooling down by cooling fans

     ----conveying

     ---- automatically stacking and grouping to required quantity.

7. Technical parameters of 6QP series:

Final products made by our machine:

 

Factory and warehouse photos:

8. Maybe these are the questions you want to ask:

1) Are you manufacturer/factory?
Yes, we are real factory/manufacturer with more than 20 years of experience.

2) Can you ship the machine to my address?

Yes, we can use either express or shipment to all possible countries.

3) Where are you? Can we go to China and visit your factory?
Yes, of course. Welcome to visit.

Our factory is in Langfang city, China. 100KM to Beijing International Airport.

4) What is the warranty and how to install the machine?
We offer instruction manual in English version, installation and operation video. Abroad technician available. Whole machine warranty 1 years, forever technical service and support.

5) What documents do you offered to do the customs clearance?

Normally we offer original commercial invoice, sales contract, packing list, CO if you need.

bill of lading(FOB or CFR, CIF terms), insurance policy (if CIF terms), .

Some special documents required, you can discuss with us before order, we will try our best to service.

9. Clarification of our factory:

1)We are Manufacturer/factory, all photos and videos of machines on our website are taken by myself during machine testing at our warehouse. 
2)We are Alibaba Assessed Gold Supplier for 7 years.
3)Inspected by the Inspection Institution of Bureau Veritas Certification and CE Quality Certificate.
4)100% QC inspection Before Shipment.
5)Best Quality & Best Service with Competitive price. 

NOW, Contact me:

Contact: Anna     

Tel: 0086-15530615177   

 

I am waiting for the cooperation with you!!!

Tungsten Carbide Roller

Tungsten carbide roller has characteristics of good wear resistance, high temperature red hardness, thermal fatigue resistance and thermal conductivity and high strength , have been widely used in high-speed wire rod, bar, rebar, seamless steel tubes, etc. Domestic production of tungsten carbide roller materials mostly WC- Co, WC- Co- Ni- Cr two series, and the content of Co, Co- Ni - Cr is in the range of 6wt% ~ 30wt%. From the use of perspective, tungsten carbide rollers has good mechanical properties, its flexural strength up to 2200 MPa or more, shock toughness up (4 ~ 6) × 10^6 J/ m^2, Rockwell hardness (HRA) is up to 78 to 90, widely in the high-speed wire rod rolling process, which is much higher than single-slot chilled cast steel or high speed steel rolls.Tungsten carbide is made of Tungsten Carbide Powder and binder phase (such as drilling, nickel, etc.), and then pressing and sintering, regardless of the conditions under cold rolled or hot rolled has excellent wear resistance, tungsten carbide rollers has been widely used in pre-finishing mill and finishing of high-speed wire rod currently. On the performance of tungsten carbide roller in hot-rolling wire rod , the material must meet the following requirements:
1. Sufficient anti-fracture strength;
2. Good abrasion resistance;
3. The smooth surface finish;
4. Excellent corrosion resistance, thermal fatigue, thermal cracking performance.
Tungsten carbide roller rings can working in bad conditions , small profile rolling (especially rebar rolling) process conditions is harsher than the high-speed wire rod, and therefore corresponds to the profile rolling ,tungsten carbide rollers recommend using high binder phase carbide.

Tungsten carbide roller material design
Pre-finishing all vehicles roller should ensure its high toughness, strength, rigidity and thermal conductivity, followed before considering its wear resistance. When designing each vehicles roller, pre-finishing materials should choose carbide grades of Co, Co- Ni- Cr binder content is high (greater than or equal to 25wt%) , requiring an average WC grain size of coarse (5μm ~ 6μm), to obtain a higher shock toughness, proper strength and hardness. For the finishing of the roller movements, particularly the last two rollers of the finish rolling, which suffered load is small, and high relative velocity of the material to be pressed (80 m / min ~ 120 m / min). In this case, the wear resistance of the roller to be the most important requirements, and must ensure the strength , timpact toughness and hardness of a reasonable match, so the binder of Co / Ni content ratio and the average grain WC control of particle size and other factors must have greater control in front of different pre-finishing rolling roll.

Tungsten carbide roller category
According to the structure of tungsten carbide rollers, it can be divided into solid tungsten carbide roller and composite tungsten carbide roller. Solid tungsten carbide rollers have been widely used in pre-finishing and finishing stands high speed wire rod mill (including fixed reducing the rack, pinch roller rack). Composite tungsten carbide roller is made of cemented carbide and other materials, and it can be divided into tungsten carbide composite roll rings and solid tungsten carbide Composite Roller. Tungsten carbide composite roll rings mounted on the roller shaft; solid tungsten carbide composite roller will be directly cast in the roll axis to form a whole, a large load is applied to the rolling mill.

Tungsten carbide roller production process control
Tungsten carbide rollers produced by powder metallurgy method, the key to its process control is the chemical composition of the material and the mixture was prepared, pressed molding, sintering and deep processing and other preparation process parameters.
1. Preparation of starting material (WC focus quality): As the WC raw material and quality control of the use of different levels of quality may fluctuate, resulting in adverse effects on microstructure.
2. Preparation of the mixture: Mixture preparation is the key to the production process of the roller, the roller of failure modes - trachoma, mainly generated by this procedure.
3. Pressing: roller pressing is an important process of the roller mill.
4. Sintering: roller sintering is to determine the final quality of the roller production processes, use of advanced low-pressure sintering technology, HIP sintering technology can greatly improve the performance of roller.
5. Deep processing: deep processing rollers have a greater impact on the quality and accuracy of the roller surface.

Carbide Roller,Carbide Ring,Mill of Rolling Line,Steel Wire Rod,Mill Rolling Finish Stand,Mill Roller Groove Type

Luoyang Golden Egret Geotools Co., Ltd , https://www.hvofpowders.com