Vane pump common fault - insufficient flow

Vane pump common troubleshooting - Pump output flow is insufficient or even not completely discharged 1. Motor is not steering 2. Tank level is too low 3. Suction line or filter is clogged 4. Motor speed is too low 5. Oil viscosity is too high 6. With oil pan end wear 7. Blade in the stator

Cummins EPA 2010 engine is widely publicized

Since the federal EPD's EPA 2010 emission standard was formally implemented on January 1, 2010, over 8 months of production and market testing, more than 26,000 units have met EPA 2010 emission standards and are equipped with selective catalytic reduction (SCR). The Cummins mediu

Jiangsu valve production and sales

Jiangsu valve companies are mainly distributed and distributed throughout the province. The distribution areas are mainly concentrated in Suzhou, Nantong (including Qidong), Yancheng (including Dafeng, Jianhu, Suining, etc.), Wuxi, Yangzhong, Changzhou, Nanjin

Heat pump classification

Heat pump by the type of low temperature heat source can be divided into air source heat pump, water source heat pump, buried pipe ground source heat pump.
1 Air source heat pump uses air as a low temperature heat source to draw heat from the surrounding air. According to its low tempe

Gas town valve specific working process

When the internal pressure of the gas ballast valve is lower than the external pressure, the gas ballast valve opens and the pressure of the compressed gas has reached the discharge pressure before the gas enters the pump chamber to make the partial condensable gas pressure in the pump chamber