Model NO.: ID-309
HS Code: 35069190
Model NO.: ID-309
HS Code: 35069190
Catain One Step Tyre Sealant & Inflator
Catain One Step Tyre Sealant & Inflator
Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.

Uses:
Just connect, inflate & go! !
Catain One Step Tyre Sealant & Inflator
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.

Catain One Step Tyre Sealant & Inflator
Catain One Step Tyre Sealant & Inflator
Catain One Step Tyre Sealant & Inflator
Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.

Uses:
Just connect, inflate & go! !
Catain One Step Tyre Sealant & Inflator
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.

Catain One Step Tyre Sealant & Inflator

358 Fence

The 358 fence is a dense mesh guardrail mesh. Due to its unique mesh size, it is generally used for security protection in airports, prisons and other places.
It can also called Security Anti-Climb 358 Fence,Anti Climb Prison 358 Security Fence,Barbed Wire 358 Fence

The origin of the name of the 358 fence is inseparable from its mesh size:

"3" corresponds to a 3-inch long hole, which is 76.2mm;

"5" corresponds to a short hole of 0.5 inches, which is 12.7mm;

"8" corresponds to the diameter of No. 8 iron wire, which is 4.0mm.

So to sum up, the 358 guardrail is a protective mesh with a wire diameter of 4.0mm and a mesh of 76.2*12.7mm. Because the mesh is extremely small, the mesh of the entire mesh looks dense, so it can sometimes be called It is dense mesh.

It is very suitable to be used as a fence net for safety protection. Because of the special mesh size of the 358 fence, it is difficult for ordinary climbing tools or fingers to climb, and it is difficult to cut it even with the help of large scissors, so if you It is used as a fence net for safety protection, so there is no problem in choosing it.
At the same time, if you have other special questions, you are welcome to contact us.


358fence 3
358fence 1
358 Fence 7
358 Fence 4



358 Fence,Security Anti-Climb 358 Fence,Anti Climb Prison 358 Security Fence,Barbed Wire 358 Fence

Anping County Dongjie Wiremesh Products Co., Ltd. , https://www.dongjiewire.com