• Model NO.: DLAM
  • Cooling Method: Air-Cooled, Direct Cooling
  • Selected Voltage: 380V/50HZ
  • Noise Level: Ultra Low
  • Application Machine: Combination machine
  • Condition: New
  • Weight(Kg): 620~1150
  • Usage: for Manufacture
  • Transport Package: Standard Wooden Package
  • Origin: China
  • Type: Air-Cooled
  • Unit Structure: Integral
  • Compressor Number: 4
  • Application Fields: Residential
  • Certification: ISO, CE
  • Size(mm): 2100*1080*1865~3050*1080*2295
  • CE: CE, ISO, SGS
  • Trademark: DARREN
  • Specification: CE, ISO, SGS
  • HS Code: 8418692090
Water Chiller Ranges: Chiller, Water Chiller, Air Chiller, Air Cooled Chiller, Water Cooled Chiller, Water Cooling Chiller, Air Cooled Chiller, Heat Pump, Industrial Chiller. Modular Chiller Unit

As an industrial water chiller, this air cooled modular heat pump chiller has the following features: Chiller

1. Cooling capacity: 56kw~100kw
2. Cooling conditions: Chilled water inlet temperature 12 degrees, outlet temperature is 7 degrees Ambient temperature is 35 degrees
Heating conditions: Hot water inlet temperature is 40 degrees, outlet temperature is 45degrees, ambient temperature is 7degrees.
3. Input power: 3P-380V-50Hz, Allowable fluctuate voltage: ± 10%, allowable voltage difference in phase: ± 2%.
4. Scroll hermetic compressor international brand-free maintenance.
5. Modular design, grading started, a variety of combinations.
6. Fuzzy logic control to ensure a balanced compressor running time, to extend the service life of chiller.
7. Intelligent defrost, fault diagnosis, energy management, antifreeze testing, a variety of optional modes of operation.
8. Attached to the operation by remote control, remote control distance of 60 meters.
9. Multi-compressor configuration, safe, reliable, low maintenance costs.
10. Friendly choose to use environmentally R407C or R134A refrigeration.
CHILLER, MODULAR CHILLER
CE Air Cooled Modular Chiller (DLAM)
CE Air Cooled Modular Chiller (DLAM)

Hot dipped galvanizing flange or hot dip Galvanized Flange is the flange surface covered zinc by dipped works, hot dipped galvanized flanges have better anti-rust than light oil coated on flanges, usually used in water supply works. hot dip galvanized flange the zinc thickness is 100μm-200μm, it is expensive than Cold or electro galvanized flange.

hot dipped galvanizing flange

Hot dipped galvanizing flange, hot dipped galvanizing flange, zinc coated flanges, backing ring hdg flange, hdg br

Jinan Hyupshin Flanges Co., Ltd , https://www.iflange.com