Model NO.: DSH 2.0
Layout Type: Verticle
Operating type: Continuous Operating
Condition: New
Production Capacity(Kg)P=1g/Cm^3: 150~30000
Time of Mix(Min): 4~10 by Maims of Raw Material
HS Code: 842119
Trademark: WanJi
Transport Package: Wooden Case
Specification: 0.3m^3~30m^3
Origin: China
Vertical Mixer:1. Working principles:
The screws of the DSH Series Vertical Mixer are rotating along the self-axes meanwhile revoluting along the central axes of conical container, so it is also called planetary conical mixer.
There are 4 working form in the cylinder.
A. Rotation: Raise material along the helical blades.
B. Revolution: Bring the material to run in circle in the container.
C. Rotation combined with revolution can make material absorbed by screw and dispersed by centrifugal forces effect.
D. Upgraded material fall down because of gravity, the materials move up and down, and inter-diffuse, convect with each other from full orientation space in the mixer.
A:Description of Double Cone Twin Screw conical Mixer:
1. good mixing effectÂ
2. multi-track revolution and rotation mixingÂ
3. no damage to the raw material
4. low power and large output
5. completely discharging with no leftoverÂ
6. total volume: 0.3-30cbm
7. batch working capacity: 0.1-15cbm
8. batch output: 0.1-20tons
9. mixing time: 15-60mins
10. driven- power:1.5kw-45kw
11. material: 316L, 304
Feature for Double Screw Cone Mixer for Powder, Granules or Liquid Mixing Machine
1.Homogeneous mixing
2.Short mixing time 5-15 minutes
3.Clean discharge &Â no leftover
4.Central discharge valve:
Electronic, pneumatic, manual (optional)
Ball valve, flap valve, knife gate valve, butterfly valve (optional)
5.Main shaft seal:Stuffing seal and air purge seal
6.Drive:Siemens motor, cycloid or gear reducer
7.Limit/safety switch (optional)
8.Heating/cooling jacket optional)
Â
DESCRIPTION
The machine is new mixer, that because of high-efficiency and precision, it's suitable for mixing the powder state materials in the phamacy, chemical, food ,instant soluble and other industries.
The rotation and revolution of machine is finished throuth a set of motor and cycloidal needle wheel reducer.Being adapted two scews to carry out stirring asymmetrically,it makes the stirring scope of raw material is wide and the mixing is uniform better and quickly.Particularly it is suitable for raw materials having large difference in specific gravity and large ratio of formulation.
TECHNICAL PARAMETERS
Â
Ce Approved Elevator,Panoramic Elevator,Outside Elevator,Building Elevator
IFE Elevators Co.,Ltd. , https://www.ife.cn