Shan Rubber Group formerly known as the People's Liberation Army after the total number 3528 factory. Due to historical reasons, Shan Rubber Group was established at the upwind outlet of Datong City, Shanxi Province, and is also located in the water conservation area. Its industrial dust and smoke are still floating over the urban areas, and the discharged wastes cause great harm to the atmosphere and water environment. Due to various reasons such as technology, capital and technology, the pollution problem of Shan Rubber Group has not been effectively solved. It is reported that pollution caused some employees of the company to have occupational diseases and symptoms such as hair loss. In February of this year, the Standing Committee of the 13 Municipal People’s Congresses of Datong City put forward a proposal on the pollution issue of Shan Rubber Group. The Standing Committee of Datong People’s Congress passed the “About the serious environmental pollution and accident hazards of the production of neoprene rubber of Shanxi Synthetic Rubber Group Co., Ltd. The decision on the investigation of specific issues, held that even if Shanyue Group achieves state-level emission standards through governance, it is difficult to achieve zero emissions at current levels, and relocation is a permanent solution.
On September 27th, Datong City held the first hearing in Shanxi Province concerning the relocation of polluting enterprises and held a hearing on the relocation of the Neoprene rubber production project of Shanya Group. All parties except Shan Rubber Group agree that the pollution problem of Shan Rubber Group has reached the point where it must be thoroughly resolved. The fundamental solution is to follow the complete relocation of Shougang.
Although the relocation of the company due to pollution is no longer news, the first case of relocation of polluting companies in Shanxi Province has attracted the attention of all parties, especially Shanxi chemical industry circles. One of the focuses of attention is who will pay for the huge relocation costs. Datong Economic Commission and the representative of Shan Rubber Group believe that for a large chemical company such as Shan Rubber Group, the relocation cost will exceed RMB 1 billion, and the relocation is not the behavior of the company, and the company cannot bear the relocation cost of more than RMB 1 billion. This huge sum of money cannot be afforded by either the municipal government or the enterprise. It must be supported by the state or province.
The second focus is on what to do after relocation. According to the assumption, Shan Rubber Group shall build a new factory in the Yanggao Industrial Park as soon as possible and move east as soon as possible. Regardless of whether they move or not, the core issue is pollution control. However, the relevant departments believe that the pollution problem of Shan Rubber is difficult to fundamentally solve from the current status quo. This means that the relocation may be a major transfer of pollution.
The third focus is who will become the next Shan Rubber Group. Shanxi is the most polluted province in the country, and there are quite a few companies that are in the industry, such as Shan Rubber Group, which are important in the industry but are heavily polluted. Although Shan Rubber Group may become the first company in Shanxi chemical industry to relocate due to pollution, it is certainly not the only one.
The fourth focus is on the impact of the domestic neoprene industry. At present, only Changshou Chemical Plant and Shan Rubber Group can produce neoprene. Since 2000, Japanese, U.S., and EU manufacturers have marketed their neoprene at low prices in the Chinese market. In May this year, the Ministry of Commerce decided to impose a five-year anti-dumping duty on the above products. Regardless of the relocation or the expansion of production scale as stated by Shan Rubber Group, it will have a major impact on the domestic neoprene industrial chain.
Judging from the current situation, although the relocation of Shan Rubber Group seems to be a foregone conclusion, some people in the industry still think that the relocation of Shan Rubber Group should be carefully considered. In particular, these issues must be given sufficient attention when formulating the relocation plan. Do not appear. "The old injury is not good, new injuries come again" situation.
Spherical Roller Bearings have two rows of rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis . The centre point of the sphere in the outer ring raceway is at the bearing axis. Therefore, these bearings are self-aligning and insensitive to misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection. Spherical Roller Bearings are designed to accommodate heavy radial loads, as well as heavy axial loads in both directions.
Bearing performance is not only determined by load or speed ratings. There are a number of other factors that contribute to bearing performance. To a large extent, performance is influenced by the geometry of the rollers, raceways and cages, the heat treatment during manufacture, as well as the surface finish of all contact surfaces.
Spherical Roller Bearings
Spherical Roller Bearings,Spherical Ball Roller Bearing,Steel Spherical Roller Bearing,Asymmetrical Spherical Roller Bearings
Ningbo Ritbearing Imp & Exp Co.,Ltd. , https://www.nbbearing.de