HS(R) pump is horizontal centrifugal heavy duty slurry pump and it is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. It will maintain high efficiency over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduce maintenance and minimise downtime. The pumps of HS can be installed as multi-stage series.
Features:
1.Replaceable wear-resistant metal or rubber liners and impellers, long service life time.Â
2. Easy to adjust the space between impeller and front liner and can be removed completely when maintaining.Â
3.Bearing assembly use grease lubrication.Â
4. Seal types: packing seal, expeller seal and mechanical seal.Â
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.Â
6. Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.Â
7. Wide application, good NPSH and high efficiency. The series pump can be installed in multistage to meet the delivery for long distance.
Â
Specification :
D:25 mm to 450 mmÂ
Q: to 5,000 m3/hrÂ
H: to 73 m
Â
Performance Sheet:
 Pump Model |
Allowable Max. Power(KW) |
Clear Water Performance |  | |||||
Capacity  Q | Head H(m) |
Speed n(r/min) |
Max.Eff. η% |
NPSH (m) |
Impeller Dia. |
|||
m3/h | l/s | |||||||
25HS-B | 15 | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2-4 | 152 |
25HSR-B | 15 | 10.8-25.2 | 3-7 | 7-52 | 1400-3400 | 35 | Â | Â |
25HHS-C | 30 | 16.2-34.2 | 4.5-9.5 | 25-92 | 1400-2200 | 20 | 2-5.5 | 330 |
40HS-B | 15 | 32.4-72 | 9-20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 184 |
40HSR-B | 15 | 25.2-54 | 7-15 | 5.5-41 | 1000-2600 | 50 | 2.5-5 | 178 |
50HS-C | 30 | 39.6-86.4 | 11-24 | 12-64 | 1300-2700 | 55 | 4-6 | 214 |
50HSR-C | 30 | 36-75.6 | 10-21 | 13-39 | 1300-2100 | Â | 2-4 | 213 |
50HHS-D | 60 | 68.4-136.8 | 19-38 | 25-87 | 850-1400 | 47 | 3-7.5 | 457 |
75HS-C | 30 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 245 |
75HS-D | 60 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 245 |
75HSR-C | 30 | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3-5 | 245 |
75HSR-D | 60 | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3-5 | 245 |
100HS-D | 60 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 365 |
100HS-E | 120 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 365 |
100HSR-D | 60 | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3-5 | 365 |
100HSR-E | 120 | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3-5 | 365 |
100HHS-F | 260 | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 711 |
150HS-E | 120 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 510 |
150HS-S | 300 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 510 |
150HSR-E | 120 | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 510 |
150HSR-R | 300 | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 510 |
150HHS-S | 560 | 468-1008 | 130-280 | 20-94 | 500-1000 | 65 | 4-12 | 711 |
200HS-ST | 560 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 |
200HSR-ST | 560 | 540-1188 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | 686 |
200MS-E | 120 | 540-1440 | 150-400 | 14-60 | 600-1000 | 73 | 4-10 | 549 |
200MS-R | 300 | 540-1440 | 150-400 | 14-60 | 600-1000 | 73 | 4-10 | 549 |
250HS-ST | 560 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 |
250HSR-ST | 560 | 720-1620 | 320-700 | 13-14 | 300-500 | 79 | 3-8 | 762 |
300HS-ST | 560 | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3-10 | 965 |
300HSR-ST | 560 | 1152-2520 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 965 |
350HS-ST | 1200 | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 1067 |
400HS-TU | 1200 | 2160-5054 | 600-1400 | 8-66 | 200-500 | 80 | 4.5-9 | 1245 |
450HS-TU | 1200 | 2520-5400 | 700-1500 | 13-57 | 200-400 | 85 | 5-10 | 1370 |
1.Capacity range recommended:50%Q'≤Q≤110%Q'(Q' Appropriate to capacity at highest efficiency point).
2.NPSH: appropriate to point Q recommended at highest speed.
Application:
HS(R) series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites. HS pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump...
Aluminum Die Casting Electrical Motor Parts are a metal forming process in which molten aluminum metal is put under pressure and injected into a die. Aluminum weighs 1/3 of a comparable steel part. The Aluminum Parts would cost less to ship due to the weight and spend less expense than other manufacturing processes.
Aluminum Die Casting Electrical Motor Parts are lightweight alloys that have good corrosion resistance, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Aluminum alloys possess high dimensional stability for complex shapes and thin walls.
Aluminum Die Casting Electrical Motor Parts are efficient and economical and offers a wide range of durable shapes and components. Little or no machining is required after a part is die casted, because the process provides very close tolerances for even complex shapes. Aluminum Die Castings can also be easily plated or finished. Aluminum Die Casting Electrical Motor Parts are dimensionally stable and heat resistant.
We have professionally produced Aluminum Die Casting Electrical Motor Parts nearly 7 years. The parts have a great property of high quality, high precision, reasonable competetive price. our products are very popular.
Aluminum Die Casting Electrical Motor Parts
Castings of Electrical Motor Parts, Aluminum Die Casting of Electric Motor Parts, Die Casting Components, Aluminum Casting of Electrical Motor
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com