Model NO.: 10mm-100mm
Marine hydraulic winch
1.Chain dia(mm):10~100
2.Working load of 1st layer(KN):5~1500
3.Drum capacity(m):100/150/200
4.Certification:CCS/LR/GL/LR.
 
General description of winch:
This series products are mainly applied to various of large and medium and small type of 
sea-going and river going ships and vessels,which installed on the main deck for ship mooring,
towing and other engineering purpose.
 
Parameters and Specification of winch: 
Model Chain Dia.(mm) Drum 
capacity (m)		 Working load 
of 1st layer
(KN)		 Nominal speed 
of 1st layer
(m/min)
TUF05 10 30 5 10
TUF10 13 60 10 25
TUF20 15 150 20 25
TUF30 15 150 30 25
TUF40 17.5 150 40 25
TUF50 19.5 150 50 25
TUF60 20.5 150 60 25
TUF63 20.5 200 63 38
TUF80 26 250 80 15
TUF100 28 200 100 15
TUF120 30 200 120 15
TUF150 35 250 150 15
TUF160 37.5 300 160 15
TUF200 41 300 200 10
TUF240 42 200 240 10
TUF250 44.5 200 250 10
TUF270 45 200 270 10
TUF320 48 250 320 10
TUF400 52 250 400 10
TUF450 56 200 450 10
TUF500 58 200 500 10

Selective Laser Sintering - Sls

Stereo Light Curing Molding - Sla

It mainly uses photosensitive resin as a raw material, and utilizes the characteristic that liquid photosensitive resin will cure quickly under ultraviolet laser beam irradiation. The photosensitive resin is generally liquid, and it immediately initiates a polymerization reaction and completes curing when irradiated with a certain wavelength of ultraviolet light (250 nm to 400 nm). SLA focuses on the surface of the light-curing material by focusing ultraviolet light of a specific wavelength and intensity to solidify it sequentially from point to line and from line to surface, thereby completing the drawing of a layered cross-section.

Sls Printing

Selective Laser Sintering - Sls,Sls 3D Printing Service,Laser Sintering 3D Printing,Selective Laser Printing

Ningbo Rongna Technology Co.,Ltd , https://www.service-machining.com