Recently, many provinces in China have experienced torrential rains that have been encountered for decades. Many underground garages have also been affected. In some places in Anhui Province, tens of thousands of vehicles have become soaking vehicles. The car is likely to be circulated by some middlemen to the used car market. However, it is necessary to have some skills to identify the soaking car so as to be deceived.

泡水车怎么鉴别_副本1.jpg

Tip 1: Open the lid and test the mud

We all know that vehicles soaked in muddy water will inevitably cause some muddy water to immerse into some small corners. Although some people thoroughly cleanse them, there are still some places with some stains. At this time, you may wish to open the engine case and remove the plastic packing box from its wire. The mud cannot be washed unless it is opened. So this is also a big way to identify whether to soak water.

Tip 2: Watch for rust

The general engine and floor are mainly made of metal. We do not need excessive rust on the floor because we know that the car will not cause some rust on the floor when it rains. But the engine is different, we can pay attention to some of the metal parts of the engine to see if there is some rust or rust. However, this method is tried in the northern regions. After all, the southern region is relatively humid, and it is not unusual to leave some rust for a long time.

泡水车怎么鉴别1_副本.jpg

Tip 3: Sniffing Odor

We may ask, buy a car is not to buy food, why smell smell? In fact, this is mainly to test whether the seat is exposed to water. Generally the seats are made of leather, plus some fillers. Once the water has a strong smell, even if it has dried, these tastes cannot be completely removed. . Therefore, if you close a good car door and smell a strong irritating smell, it is a water inlet car.

In addition, the color of the leather can also be used to identify the color of the leather. After most blisters, the color of the leather will be deepened, and the color will become lighter in some places where there is no water, so this will bring it very intuitive. phenomenon.

There may be a gap in the performance of vehicles when wading. Therefore, a friend who needs to buy a car must pay attention to it.


Polyurethane Hose

Structure:Flexible High Pressure Composite Pipe is composed of high temperature resistant polyvinylidene fluoride resin, 1-6 layers
of polyester industrial filament winding and impact resistant polyethylene resin.
Application: High Density Polyethylene Pipe is used in oil and gas gathering and transportation, injection, produced water and
sewage transportation systems in oil and gas fields
Temperature range: - 40 ℃ ~ 110 ℃
Standard: SY / t6662 2-2020 Q/XXCJ282-2020
Characteristics: Composite High-Pressure Transmission Pipe is suitable for the transportation of petroleum based and water-based liquids
and the system operation with high ambient temperature requirements
Appearance: the appearance is black smooth


1. Good flexibility:

Flexible pipe with outer diameter less than 200 mm can be bent into a circle with radius of 2 meters or less to realize coil supply and facilitate storage and transportation.
2. Convenient and fast construction:
With the continuous laying method, the average laying speed can reach 500 meters per hour, the installation is simple, fast, safe and reliable, with less joints, no welding, short construction period and low comprehensive construction cost.
3. Good corrosion resistance:
Ultra high molecular weight polyethylene (UHMWPE) with strong corrosion resistance (especially resistant to H2S, CO2 and Cl -) is used as medium transport layer material, which has long service life in corrosive fluid and low system cost.



Polyurethane Hose,Pu Hose,Pu Tube,Pu Hose Pipe

Shaanxi Yanchang Petroleum Northwest Rubber Flexible Pipe Co., Ltd. , https://www.cnrtp.com