Best Hope factory is dedicate in the large size plastic part mold tooling and molding.
The kitchen area plastic part is always we are focusing on for the high quality market.
Description for the picture dish rack
Material: PP/PE, eco-freindly
Length: 44 cm
Width: 31 cm
Height: 9 cm
BHM's Facilities:
BHM owns two facilities located in Shanghai and Suzhou, respectively focuses on high precision molds and large size molds.
Â
Since established in 2005, BHM has been developing very fast, business expands rapidly due to quality products and serves, At present, BHM has covers an area of 10000m2 in total and owns 185 employees including 28 engineers, 110molds makers,10 QC personnel and many injection operators.
Â
| Company Name | Best Hope Mold & Plastic Co., Ltd |
| Part Material | ABS, PC, PP, PE, Nylon, POM, TPU, TPE, PVC, PTFE, PVDF |
| Engineering | CAD, UG, ProE, CAD, Solidworks, Mastercam, Cimatron |
| Mold Grade | SPI CALSS 101 MOLD, SPI CLASS 102 MOLDÂ |
| Cycles/Mold Life | One million or more, under 500,000 |
| Mold Base | LKM, DME, Hasco |
| Mold Spare Parts | DME, HASCO, MISUMI, LKM standard |
| Mold Type | Cold runner, hot runner, hot to cold runner, automatic mold, insert mold, over mold, twin-shot mold |
| Hot Runner Brand | Husky, YUDO, Mold Masters, Synventive, Mastip |
| Demoulding | Motor, oil cylinder, stripping plate, slides, angel pin, ejector sleeves |
| Equipment | Miller, Gantry Milling, Driller, CNC, high speed CNC, EDM, 2-end, low speed wire cut, CMM, |
| Lead Time | 3-10 weeks according to complexity of mold |
| Packaging | Fumigation-free wooden box |
| Main Markets | Medical, Automotive, Plastic Packing, Electronics, Appliances |
| Work Flow (Basic Steps, We do more than this described) |
You send us samples or ready drawings |
|
We confirm DFM, final drawings with you | |
|
We start tooling and update tooling progress to you every week | |
|
Finish tool and tool trial out | |
|
Send you tool trial samples by DHL, Fedex, TNT, UPS, Aramex, | |
|
Until you confirm samples, we inspection mold, pack it for shipping |
Collets and Collet Bodies
Collets directly hold the tungsten in place when you tighten the back cap and create the electrical contact necessary for good current transfer. They are generally made of standard grade copper or tellurium copper.
Collet bodies screw into the TIG torch and accommodate various size tungsten and their respective collets, each of which range in size from .020 to 1/4 inches. They are also made of standard grade copper or tellurium copper.
When choosing collets and collet bodies, you need to consider two main factors.
First is price. Standard grade copper collets and collet bodies are less expensive, but they also tend to be less durable. Less expensive collet and collet bodies are also prone to failure under high temperature applications. After extended use, they do not secure the tungsten as reliably.
Conversely, the more expensive tellurium copper collets and collet bodies have better heat resistance on higher amperage applications. These consumables generally resist twisting or elongating and hold the tungsten more securely after extended periods of use. They also have more tensile strength and less ductility.
You also need to decide between a single- or two-piece system (See figure 1). Typically, manufacturers sell collets and collet bodies separately to match a specific tungsten size. For example, you would purchase a 1/16-inch Collet And Collet Body to match a 1/16-inch tungsten. This system works well and accommodates a wide range of tungsten sizes, especially smaller ones.
Fig. 1 Choosing between a standard two-piece system (top) or a single-piece system (bottom) is one of the factors in determining which collets and collet bodies are best for you.
There are also single piece systems that combine the collet and collet body together. From a performance standpoint, they provide better securing force and are easier to remove when used in a demanding application. The reason for this factor is because the collet mechanism is further away from the heat and less susceptible to heat distortion. They also reduce the possibility of mismatching collet and collet body sizes, allow for quicker tungsten changeover and help simplify parts management.
Collet And Collet Body
Collet And Collet Body,Copper Collet Body,Tig Collet Body,Collet Body For Welding Torch
Changzhou Edaweld Trading Company Limited , https://www.edaweld.com