Model NO.: TIG-200P
Name: AC DC TIG Welding Machine
Mosfet: 20PCS
Diodes: 20PCS
Trademark: As require
Transport Package: Carton
Specification: 498x328x302mm
Origin: Shenzhen China
HS Code: 85153900
Model NO.: TIG-200P
Name: AC DC TIG Welding Machine
Mosfet: 20PCS
Diodes: 20PCS
Trademark: As require
Transport Package: Carton
Specification: 498x328x302mm
Origin: Shenzhen China
HS Code: 85153900
ACDC tig welding machine product Characteristics:
*Adopting PWM control technology,constant current,accurate current control.
*High frequency arc starting,no matter the current is high or low,the arc starting rate high.
*DC AC tig welding machine steady welding current,esthetic shaping of welding seam.
*Adjustable pulse current and pulse frequency, apply to many kinds of welding technology.
*ACDC tig welder one machine serves several purposes,saving the welding cost.
*The machine can automatic welding,Optional cycling water tank.
*Can be used to weld aluminium, stainless steel,carbon steel,alloyed steel,copper,titanium etc. 
Model: AC/DC TIG-200
Input power voltage frequency(V,Hz): AC220(single phase)±15%,50/60
Rated input power capacity(KVA): 4.5
No-load voltage(V): 56
Output current range.(A):   20-200
Rated output voltage(V): 18
Duty cycle (%)(25ºC): 60
No-load loss(W): 40
Arc-starting: HF 
Efficiency(%):  85
Power factor (COSφ):  0.93
Insulation class: F
Weight(KG): 20
Overall dimension(mm): 498×328×302
Case protection degree: IP21S
Pre-flow time(s): 0-2
Duty ratio(%):   20-8
Current down-slope time(s): 0-5
Post-flow time(s): 2-10
Remote interface: without
AC welding thickness(mm):      0.5-5
TIG/MMA 200p 220V Inverter AC/DC Aluminum Welding Machine
TIG/MMA 200p 220V Inverter AC/DC Aluminum Welding Machine
  ACDC tig welding machine product Characteristics:
*Adopting PWM control technology,constant current,accurate current control.
*High frequency arc starting,no matter the current is high or low,the arc starting rate high.
*DC AC tig welding machine steady welding current,esthetic shaping of welding seam.
*Adjustable pulse current and pulse frequency, apply to many kinds of welding technology.
*ACDC tig welder one machine serves several purposes,saving the welding cost.
*The machine can automatic welding,Optional cycling water tank.
*Can be used to weld aluminium, stainless steel,carbon steel,alloyed steel,copper,titanium etc. 
Model: AC/DC TIG-200
Input power voltage frequency(V,Hz): AC220(single phase)±15%,50/60
Rated input power capacity(KVA): 4.5
No-load voltage(V): 56
Output current range.(A):   20-200
Rated output voltage(V): 18
Duty cycle (%)(25ºC): 60
No-load loss(W): 40
Arc-starting: HF 
Efficiency(%):  85
Power factor (COSφ):  0.93
Insulation class: F
Weight(KG): 20
Overall dimension(mm): 498×328×302
Case protection degree: IP21S
Pre-flow time(s): 0-2
Duty ratio(%):   20-8
Current down-slope time(s): 0-5
Post-flow time(s): 2-10
Remote interface: without
AC welding thickness(mm):      0.5-5
TIG/MMA 200p 220V Inverter AC/DC Aluminum Welding Machine
TIG/MMA 200p 220V Inverter AC/DC Aluminum Welding Machine
 

Aluminum Briquette Machine

Aluminum scrap metal, in the form of turnings, filings, chips and shavings, is produced every day of production, piling up on the equipment and floor. While aluminum and fluids waste can be costly to dispose of and difficult to reuse without processing, aluminum briquetting allows manufacturers to both eliminate costs and create a new revenue. If your chips are small, then can directly pressed by briquetter, if long, better press after shred.

Aluminum Briquetter, Aluminum Shavings Briquette Machine, Aluminum Chips Briquette Machine, Aluminum Press, Aluminium Briquette Machine

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-briquetter.com