Valve in the fluid system, used to control the direction of the fluid, pressure, flow device. Valves are devices that allow the flow and stop of the media (liquid, gas, powder) in the piping and equipment and control their flow.
1, the valve storage environment should pay attention to, should be stored in a dry and ventilated room, and plug the ends of the pathway.
2, install the valve after the application should be regularly overhaul to ensure its normal work.
3, should check the valve sealing surface is worn, and according to the situation for repair or replacement.
4, check the stem and stem nut trapezoidal thread wear, filler is out of date failure, etc., and make the necessary replacement.
5, the valve sealing performance should be tested to ensure its performance.
6, the operation of the valve should be intact, flanges and bolts on the bracket complete, non-destructive threads, there is no loose phenomenon.
7, If the handwheel is lost, it should be timely and can not be replaced by a live spanner.
8, if the valve environment is more harsh, vulnerable to rain, snow, dust, sand and other dirt contamination, you should install the protective cover for the stem.
9, the valve in operation, to avoid its beat, or support heavy objects.
Our armed industrial robot is mainly used to grinding. In the end of the robot, our Force Control System is installed on. Now robot have four-axis and six-axis. Robot will impose force to our force control system, force control system will absorb the force and the shock, in the program control, our force control system will impose special force onto workpiece. This means flexible control.
Four-axis industrial robot, six-axis industrial robot, armed industrial robot, grinding robot
DARU Technology (Suzhou) Co., Ltd. , https://www.szconstantforceactuator.com