Hv Cable Fault Locator for Power Cables

HV Cable Fault Locator for Power Cables



Introduction:

This cable fault detector can test all types power cable (voltage class 1KV~35KV) , local cable, FM communication cable, coaxial cable, short circuit, earth, high resistance leakage, high resistance flashover fault of the metal overhead lines, and the broken & poor contact of the cable. 

It also can test the length of the cable and the speed of the electric wave on the cable.

To test the HV arcing fault of cable, earthing high &low resistance, short circuit and breakage of the cable, poor contact, etc.;

If equipped with fault locator, it can decide the exact broken position of the cable ,applies to power cable in various type, voltage and communication cable;

 
Features:

Multi functional, safe, fast speed and accurate. It uses LV impulse method and HV flashover method to test, can test kinds of fault of the cable, if equipped with sound locator, can accurately the position of the fault point.

High precision, adopts high-speed sampling technique, A/D sampling speed is 100MHz, resolution is 1m, detection blind area is 1m.

High degree of intelligence, test results auto displayed by LCD.

Can store and review the waveform and parameters, these information will not loss after power off.

Dual display, compare the measured waveform and normal waveform of the fault cable, benefit to further detection of the fault.

With function of wave form expansion ratio, change the proportion of the waveform, expand the waveform to test.

Directly display the direct distance or relative distance between fault point and measured point.

Can modify the speed according different measured cable.

Portable design , small in volume , with rechargeable battery, easy to carry and operate.

 
Specifications:

  HV Cable Fault Locator for Power Cables



Introduction:

This cable fault detector can test all types power cable (voltage class 1KV~35KV) , local cable, FM communication cable, coaxial cable, short circuit, earth, high resistance leakage, high resistance flashover fault of the metal overhead lines, and the broken & poor contact of the cable. 

It also can test the length of the cable and the speed of the electric wave on the cable.

To test the HV arcing fault of cable, earthing high &low resistance, short circuit and breakage of the cable, poor contact, etc.;

If equipped with fault locator, it can decide the exact broken position of the cable ,applies to power cable in various type, voltage and communication cable;

 
Features:

Multi functional, safe, fast speed and accurate. It uses LV impulse method and HV flashover method to test, can test kinds of fault of the cable, if equipped with sound locator, can accurately the position of the fault point.

High precision, adopts high-speed sampling technique, A/D sampling speed is 100MHz, resolution is 1m, detection blind area is 1m.

High degree of intelligence, test results auto displayed by LCD.

Can store and review the waveform and parameters, these information will not loss after power off.

Dual display, compare the measured waveform and normal waveform of the fault cable, benefit to further detection of the fault.

With function of wave form expansion ratio, change the proportion of the waveform, expand the waveform to test.

Directly display the direct distance or relative distance between fault point and measured point.

Can modify the speed according different measured cable.

Portable design , small in volume , with rechargeable battery, easy to carry and operate.

 
Specifications:

 

The cold room insulated panels are extensively put to use to maintain the temperature inside, prevent air leakage and for stronger build. Insulated Panels for Cold Storage / Cold Room And Freezer Room construction are widely use as walls, ceilings and roofs for cooler, freezer and food processing buildings, in new and retrofit construction. We are one of the leading insulated panel manufacturers in China, has 3 production lines, we can produce puf,pir,pur and pu panels.

We supply all Cold Room Solutions with Cold Room Panels , Cold Store Panels , Freezer Room Panels and Cold Room Insulation Panels.

Double surface materials are available with colored steel, galvanized steel, stainless steel, embossed aluminum etc. With best materials and surface steel gurantee long life using and reliable quality. Cold room panels thickness is 50mm, 75mm, 100mm, 120mm, 150mm, 175mm, 200mm and 250mm for all temperature control cold room and cold storage. The Cold Storage Panels features has convenient installation, best quality and performance
PU foam density:40-42kg/m³
Thermal Conductivity: 0.022W/M-K
Covering color steel metal thickness: 0.4mm, 0.45mm, 0.5mm, 0.55mm, 0.6mm

Cold Room Panels

Cold Store Panels,Cold Room Solutions,Freezer Room Panels,Cold Room Insulation Panels

Shandong Atlas Refrigeration Technology Co.,Ltd. , https://www.atlascoldroom.com