Model NO.: GD-TC
Atmospheric Pressure: (86~106) Kpa
Dimension: 225mm×165mm×125mm
Trademark: Gold
Transport Package: Standrad Wooden Case
Specification: 225mm× 165mm× 125mm
Origin: Chongqing, China
HS Code: 9031809090
Model NO.: GD-TC
Atmospheric Pressure: (86~106) Kpa
Dimension: 225mm×165mm×125mm
Trademark: Gold
Transport Package: Standrad Wooden Case
Specification: 225mm× 165mm× 125mm
Origin: Chongqing, China
HS Code: 9031809090
HV Cable Fault Locator for Power Cables

Hv Cable Fault Locator for Power Cables


Introduction:


This cable fault detector can test all types power cable (voltage class 1KV~35KV) , local cable, FM communication cable, coaxial cable, short circuit, earth, high resistance leakage, high resistance flashover fault of the metal overhead lines, and the broken & poor contact of the cable. 

It also can test the length of the cable and the speed of the electric wave on the cable.

To test the HV arcing fault of cable, earthing high &low resistance, short circuit and breakage of the cable, poor contact, etc.;

If equipped with fault locator, it can decide the exact broken position of the cable ,applies to power cable in various type, voltage and communication cable;

 
Features:

Multi functional, safe, fast speed and accurate. It uses LV impulse method and HV flashover method to test, can test kinds of fault of the cable, if equipped with sound locator, can accurately the position of the fault point.

High precision, adopts high-speed sampling technique, A/D sampling speed is 100MHz, resolution is 1m, detection blind area is 1m.

High degree of intelligence, test results auto displayed by LCD.

Can store and review the waveform and parameters, these information will not loss after power off.

Dual display, compare the measured waveform and normal waveform of the fault cable, benefit to further detection of the fault.

With function of wave form expansion ratio, change the proportion of the waveform, expand the waveform to test.

Directly display the direct distance or relative distance between fault point and measured point.

Can modify the speed according different measured cable.

Portable design , small in volume , with rechargeable battery, easy to carry and operate.

 
Specifications:
1 Longest measured distance 32km (100km for open wire )
2 Detection blind area 1m
3 Reading resolution 1m
4 Power consumption 5VA
5 Service conditions Temperature: -10ºC ~+ 50ºC;
Relative humidity: 40ºC(20~90)%RH;
Atmospheric pressure (86~106) Kpa
6 Dimension 225mm*165mm*125mm
7 Weight 2kg

Hv Cable Fault Locator for Power Cables
  HV Cable Fault Locator for Power Cables

Hv Cable Fault Locator for Power Cables


Introduction:


This cable fault detector can test all types power cable (voltage class 1KV~35KV) , local cable, FM communication cable, coaxial cable, short circuit, earth, high resistance leakage, high resistance flashover fault of the metal overhead lines, and the broken & poor contact of the cable. 

It also can test the length of the cable and the speed of the electric wave on the cable.

To test the HV arcing fault of cable, earthing high &low resistance, short circuit and breakage of the cable, poor contact, etc.;

If equipped with fault locator, it can decide the exact broken position of the cable ,applies to power cable in various type, voltage and communication cable;

 
Features:

Multi functional, safe, fast speed and accurate. It uses LV impulse method and HV flashover method to test, can test kinds of fault of the cable, if equipped with sound locator, can accurately the position of the fault point.

High precision, adopts high-speed sampling technique, A/D sampling speed is 100MHz, resolution is 1m, detection blind area is 1m.

High degree of intelligence, test results auto displayed by LCD.

Can store and review the waveform and parameters, these information will not loss after power off.

Dual display, compare the measured waveform and normal waveform of the fault cable, benefit to further detection of the fault.

With function of wave form expansion ratio, change the proportion of the waveform, expand the waveform to test.

Directly display the direct distance or relative distance between fault point and measured point.

Can modify the speed according different measured cable.

Portable design , small in volume , with rechargeable battery, easy to carry and operate.

 
Specifications:
1 Longest measured distance 32km (100km for open wire )
2 Detection blind area 1m
3 Reading resolution 1m
4 Power consumption 5VA
5 Service conditions Temperature: -10ºC ~+ 50ºC;
Relative humidity: 40ºC(20~90)%RH;
Atmospheric pressure (86~106) Kpa
6 Dimension 225mm*165mm*125mm
7 Weight 2kg

Hv Cable Fault Locator for Power Cables
 

A chilled room is a refrigerated area for Cold Storage  of perishable items, especially food, to preserve them. In a Chiller Room, Cold Room Chiller and Walk In Chiller Rooms, the temperature is typically between 0 - 5°C. Cold store applications are normally used with a direct expansion air cooler with the primary refrigerant.

Atlascool is a turn key solution provider as manufacturer for supply and installation of industrial & Domestic Walkin Cold Room , cold storage rooms, Freezer Room, chiller room, cold room chiller, walk in chiller rooms, Chiller Room & refrigeration plants for various range of applications from Food storage and warehousing, flowers, supermarkets, hotels, hospitals, blood banks to pharmacies. Our aim is producing of unique Cold room, Walkin Chiller and Walkin Freezer room, walk in chiller room & refrigeration systems, of various types and capacities for food sector, flowers, wine and beer, frozen food, frozen fruits and vegetables, refrigerated fruits and vegetables, frozen fish and many other industries. Modular negative temperature cold storage rooms, positive temperature rooms and zero temperature Cold Rooms are manufactured , designed and supplied in China.

Chiller Room

Chiller Room,Cold Room Chiller,Room Chiller Unit,Walk In Chiller Rooms

Shandong Atlas Refrigeration Technology Co.,Ltd. , https://www.atlascoldroom.com