1) Before reversing, you should take a closer look at the situation in front of the garage and in the garage. If the garage is narrow, you should not pour the car in, and wait for the car to rewind during the day.
2) After observing the advance and retreat route, follow the normal reversing operation technique to drive the car to the front of the garage.
3) Turn off the headlights, turn on the reversing light or follow the rear lights. If there is no reversing light or follow the rear lights, turn on the rear lights to check the situation behind the car.
4) If you can't see the garage door column, you can use a flashlight or other lights to illuminate it, or you can put a piece of cloth or white paper on the post inside the garage for observation.
5) In the case of command, when the car is poured into the garage, the commander should stand in a place where he can see both the rear door and the gate and can be seen by the driver.
copper fittings approved WRAS,DVGW,SABSS,UPC,NSF61,covered EN1254-1 and ASME B16.22,copper fittings,copper pipe fittings,copper plumbing fittings,copper capillary fittings,copper pressure fittings
copper fittings,copper pipe fittings,copper plumbing fittings,copper capillary fittings,copper pressure fittings
Taizhou Runde Company , https://www.nerausmotor.com