Oval gear flowmeters are widely used in pharmaceutical, paper, environmental protection, water supply and drainage, sewage treatment, etc. Its biggest feature is that other flowmeters can not be replaced, its zui love is heavy oil, hydraulic oil Such a thicker oil, so other flow meters are far behind!
The principle of the elliptical gear flowmeter is to work on the gears and gears. In the long-term, high-load operation process, some troubles will inevitably occur. The old user’s practice is to first encounter the fault without first panic, first find out the cause, which is caused by Faults, and then troubleshooting one by one, the following six common faults and handling techniques common to old users on elliptical gear flowmeters:
First, the gear does not rotate
the reason:
1. There are debris in the pipeline;
2, the filter is damaged, the debris enters the watch, causing the gear to get stuck;
3. Because the flow is too large, the bearing wears, and the elliptical gear collides with the internal helium, causing the gear to get stuck as shown in Figure 1.
Processing skills:
1. Clean the flow meter and pipeline;
2. Repair the filter;
3. Replace the bearing to ensure that the gap can operate flexibly.
Second, the elliptical gear rotates, the pointer does not move or stops when walking
the reason:
1. The rotating fastener is sliding, damaged or inflexible;
2. The magnetic coupling slides;
3. The character wheel component is stuck.
Processing skills:
1. Re-fix the fasteners to remove the inflexible parts;
2. Check whether the magnetic coupling is flexible and magnetic strength;
3. Troubleshoot the character wheel components.
Third, the flowmeter negative error is large
the reason:
1. Bypass valve leakage;
2. The oval gear flow meter measures the damage or corrosion of the inner wall or bearing;
3. The flow rate is lower than the lower limit;
4. The magnetic coupling is slippery or the gear system is periodically obstructed;
5. The actual liquid viscosity is less than the viscosity of the test solution.
Processing skills:
1. Check the bypass valve;
2. Replace the bearing, check the gear and adjust the clearance;
3. Increase the flow rate;
4. Repair or replace the magnetic coupling or gear system;
5. Select the test fluid that is similar to the actual liquid viscosity to check the flowmeter or make a viscosity correction.
Fourth, the flowmeter positive error is large
Reasons: 1. The flow has a large pulsation or contains gas;
2. The actual liquid viscosity is greater than the test liquid viscosity;
3. When the small inlet valve is closed, the medium is not filled with the metering chamber.
Processing skills:
1. Reduce flow pulsation or increase gas separator;
2. Select the test fluid that is close to the actual liquid viscosity to check the flowmeter or make viscosity correction;
3. Use the flow meter outlet valve to regulate the flow of the medium.
5. The secondary table indication value is less than the first table indication value.
the reason:
1. Loosen the fastening screw at the blade;
2. The transmitter is dropped.
Processing skills:
1. Fasten the locking screw;
2. Adjust the gap between the transmitter blade and the transmitter.
Six, the second table does not indicate
the reason:
1. The line is open or shorted;
2. The transmitter is damaged as shown in Figure 2.
Processing skills:
1. Carefully check the line;
2. Replace the transmitter.
Jinling Instrument
About 3d silicone Phone Case:
As an OEM silicone manufacturer ,our factory can help customers to do a lot of 3d silicone phone case,by their own customized designs ,like animal figures,fruit shapes ,and all other kinds of images,these kinds of phone case designs will make your world more colorful ,beautiful and vivid,warmly welcome your own designs !
3d silicone phone case details:
1.Product name:3d silicone phone case,silicone cartoon phone cases,3d cartoon phone cases,3d cartoon cases,3d cell phone cases,3d silicone iphone 6 cases
2.Place of origin:Guangdong China
3.Color:any pantone color can be done
4.Logo:printed,debossed,embossed
5.MOQ:500pcs,special design can be flexible .
6.Package:1 pcs/opp,customized design is available.
7.Design:Customized
8.Certification:FDA,LFGB,SGS,ROHS,etc.
9.Compatible Brand:for all phone models
10.3d silicone phone case photos for reference.
3D Silicone Phone Case,3D Cartoon Phone Cases,3D Cell Phone Cases,3D Silicone Iphone 6 Cases
Dongguan OK Silicone Gift Co., Ltd. , https://www.dgsiliconewearablegifts.com