The two-stage pelletizing system applied in the re-pelletizing job, which consists of two sets of single screw extruder, in case that recycles are with heavy required higher pelletizing output. The ACSS series compacting and pelletizing system combines function of crushing, compacting, plasticization and pelletizing to one step. ACSS system is a reliable and efficiency solution for plastics films, raffias, filaments, bags, woven bags and foaming materials re-pelletizing.
Final productions produced by ACSS system are in the form of pellets/ granules, can directly put into the production line for film blowing, pipe extrusion and plastics injection, etc.
Specifications:
Â
| Model Name | ACSS |
| Recycling Material | HDPE, LDPE, LLDPE, PP, BOPP, CPP, OPP, PA, PC, PS, PU, EPS |
| Final Product Shape | Pellets/ Granules |
| System Composition | Belt conveyor, cutting compactor, single screw extruder, pelletizing device, water cooling unit, dewatering section, conveying blower and production silo |
| Output Range | 150kg/h-1000kg/h |
| Feeding Device | Belt conveyor (standard), Rolls hauling off device (Optional) |
| Compactor Volume | 300 Liters-1200 Liters |
| Screw Diameter | 80mm-180mm (standard) |
| Screw material | 38CrMoAlA nitride steel( SACM-645), bimetallic ( Optional) |
| Screw L/D | 31/1, 32/1, 34/1, 36/1 (depending on features of recycles) |
| Barrel's Heating | Ceramic heater or Casting Aluminum heater |
| Barrel's Cooling | Air cooling through fan blowers |
| Vacuum Degassing | Double vented degassing (Standard) |
| Pelletizing Type | Water ring die-face hot pelletizing |
| Voltage Standard | Depending on project's location |
| Optional Devices | Metal detector, rolls hauling off device, micro feeder for masterbatch, additives, chiller, etc. |
| Delivery Time | 60 days after order takes effect. |
| Warranty | 13 months since date of bill of lading |
| Technical Service | Project design, suggestion on factory construction, installation and commissioning |
Working steps of ACSS compacting and pelletizing system
1. Feeding: as standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls' scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor's room is. Metal detector can be combined with belt conveyor, and can interlock with control system, to warn and stop the system, in case that metal is found in feeding section.
2. Crushing and compacting: the rotatory blades of compactor will cut up incoming scraps. Frictional heating which caused by high speed rotatory blades will heat and let scraps shrinking just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushes, dries and compacts the material which enables a fast and stable feeding from the compactor directly into the extruder.
3. Plasticization and degassing: A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in the first stage extruder, and the plastic will be extrude by the second stage extruder. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with some water content.
4. Melt filtration: Segmented filtering principle, fore filtering in the first extruder, and fine filtering in the second extruder, to reduce the frequency of filtering sieves changing. The requirements on the filter technology depend heavily on the quality of the input material as well as the planned use of granules.
5. Pelletizing: die-face water ring pelletizing system set as the standard granulating method in ACSS system. Self-adjusting pelletizing head for the best granulate quality and long uptime thanks to consistently correct blades pressure. RPM of rotatory blades is automatic based on melt extruding pressure. Advanced dewatering vibration sieve combining with horizontal-type centrifugal dewatering present high performance dried pellets.
Â
Main technical parameter:
| Machinery Size | Diameter of the screw(mm) | L/D | Motor power(Kw) | Throughput rate(Kg/hr) | |
| ACSS80/120 | ACS300/80 | 80 | 31 | 45/55 | 150-200 |
| ASE120 | 120 | 10 | 22 | ||
| ACSS100/120 | ACS500/100 | 100 | 31 | 90/110 | 300-350 |
| ASE120 | 120 | 10 | 30 | ||
| ACSS120/150 | ACS800/120 | 120 | 31 | 132 | 400-450 |
| ASE150 | 150 | 10 | 37 | ||
| ACSS140/150 | ACS1000/140 | 140 | 31 | 160/185 | 500-650 |
| ASE150 | 150 | 10 | 45 | ||
| ACSS160/180 | ACS1200/160 | 160 | 31 | 220/250 | 800-1000 |
| ASE180 | 180 | 10 | 55 | ||
Â
Advantages of ACSS compacting and pelletizing system
1.Segmented filtering principle,fore filtering in the first extruder,and fine filtering in the second extruder,to reduce the frequency of filtering sieved changeing;
 2.Thanks to separated filering system in two-stage extruder,system can realize steady extrusion job;
Â
 3.Has one more volatilization between first and second extruder
 4.Second stage's extruder can present low temperature extrusion, which can guarantee the final production's quality.
Â
Why choose us
Lower investment cost for a high quality and durable machine;
Â
Low energy consumption with high production output;
Overseas installation and training are available;
Machine warranty with spares in stocking and in-time delivery;
Â
Fast machine delivery and installation: AceRetech produces on an average of 10 sets of plastic machines per month and can deliver the machine faster than most manufacturers. The regular delivery time of an AceRetech recycling machine is 60 days.
Â
The two-stage pelletizing system applied in the re-pelletizing job, which consists of two sets of single screw extruder, in case that recycles are with heavy required higher pelletizing output. The ACSS series compacting and pelletizing system combines function of crushing, compacting, plasticization and pelletizing to one step. ACSS system is a reliable and efficiency solution for plastics films, raffias, filaments, bags, woven bags and foaming materials re-pelletizing.
Final productions produced by ACSS system are in the form of pellets/ granules, can directly put into the production line for film blowing, pipe extrusion and plastics injection, etc.
Specifications:
Â
| Model Name | ACSS |
| Recycling Material | HDPE, LDPE, LLDPE, PP, BOPP, CPP, OPP, PA, PC, PS, PU, EPS |
| Final Product Shape | Pellets/ Granules |
| System Composition | Belt conveyor, cutting compactor, single screw extruder, pelletizing device, water cooling unit, dewatering section, conveying blower and production silo |
| Output Range | 150kg/h-1000kg/h |
| Feeding Device | Belt conveyor (standard), Rolls hauling off device (Optional) |
| Compactor Volume | 300 Liters-1200 Liters |
| Screw Diameter | 80mm-180mm (standard) |
| Screw material | 38CrMoAlA nitride steel( SACM-645), bimetallic ( Optional) |
| Screw L/D | 31/1, 32/1, 34/1, 36/1 (depending on features of recycles) |
| Barrel's Heating | Ceramic heater or Casting Aluminum heater |
| Barrel's Cooling | Air cooling through fan blowers |
| Vacuum Degassing | Double vented degassing (Standard) |
| Pelletizing Type | Water ring die-face hot pelletizing |
| Voltage Standard | Depending on project's location |
| Optional Devices | Metal detector, rolls hauling off device, micro feeder for masterbatch, additives, chiller, etc. |
| Delivery Time | 60 days after order takes effect. |
| Warranty | 13 months since date of bill of lading |
| Technical Service | Project design, suggestion on factory construction, installation and commissioning |
Working steps of ACSS compacting and pelletizing system
1. Feeding: as standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls' scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor's room is. Metal detector can be combined with belt conveyor, and can interlock with control system, to warn and stop the system, in case that metal is found in feeding section.
2. Crushing and compacting: the rotatory blades of compactor will cut up incoming scraps. Frictional heating which caused by high speed rotatory blades will heat and let scraps shrinking just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushes, dries and compacts the material which enables a fast and stable feeding from the compactor directly into the extruder.
3. Plasticization and degassing: A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in the first stage extruder, and the plastic will be extrude by the second stage extruder. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with some water content.
4. Melt filtration: Segmented filtering principle, fore filtering in the first extruder, and fine filtering in the second extruder, to reduce the frequency of filtering sieves changing. The requirements on the filter technology depend heavily on the quality of the input material as well as the planned use of granules.
5. Pelletizing: die-face water ring pelletizing system set as the standard granulating method in ACSS system. Self-adjusting pelletizing head for the best granulate quality and long uptime thanks to consistently correct blades pressure. RPM of rotatory blades is automatic based on melt extruding pressure. Advanced dewatering vibration sieve combining with horizontal-type centrifugal dewatering present high performance dried pellets.
Â
Main technical parameter:
| Machinery Size | Diameter of the screw(mm) | L/D | Motor power(Kw) | Throughput rate(Kg/hr) | |
| ACSS80/120 | ACS300/80 | 80 | 31 | 45/55 | 150-200 |
| ASE120 | 120 | 10 | 22 | ||
| ACSS100/120 | ACS500/100 | 100 | 31 | 90/110 | 300-350 |
| ASE120 | 120 | 10 | 30 | ||
| ACSS120/150 | ACS800/120 | 120 | 31 | 132 | 400-450 |
| ASE150 | 150 | 10 | 37 | ||
| ACSS140/150 | ACS1000/140 | 140 | 31 | 160/185 | 500-650 |
| ASE150 | 150 | 10 | 45 | ||
| ACSS160/180 | ACS1200/160 | 160 | 31 | 220/250 | 800-1000 |
| ASE180 | 180 | 10 | 55 | ||
Â
Advantages of ACSS compacting and pelletizing system
1.Segmented filtering principle,fore filtering in the first extruder,and fine filtering in the second extruder,to reduce the frequency of filtering sieved changeing;
 2.Thanks to separated filering system in two-stage extruder,system can realize steady extrusion job;
Â
 3.Has one more volatilization between first and second extruder
 4.Second stage's extruder can present low temperature extrusion, which can guarantee the final production's quality. The ball mills are used to grind materials into extremely fine powder for use in mineral dressing processes, paints, pyrotechnics, ceramics and selective laser sintering. The materials are ground by Coriolis forces, an interaction between frictional and impact forces, as a result of difference in speeds between the balls and grinding jars.
Â
Why choose us
Lower investment cost for a high quality and durable machine;
Â
Low energy consumption with high production output;
Overseas installation and training are available;
Machine warranty with spares in stocking and in-time delivery;
Â
Fast machine delivery and installation: AceRetech produces on an average of 10 sets of plastic machines per month and can deliver the machine faster than most manufacturers.
The rolls rotate on precision bronze bearings and are simultaneously driven by a pinion stand. The roll height is adjustable independently or simultaneously through a side-wheel screw down assembly. There are entry and exit tables with adjustable guides installed on the entry table. Emergency stop bars will be installed on entry and exit of mill. In addition, all controls are in a centrally located operating station.
Rod Mill,Rod Mill For Grinding,Rod Mill Equipment,Rod Mill Machine
Shenyang Sanland Mining Equipment Manufacture Co., Ltd. , https://www.sanlandcrushers.com