1 Check that all parts and guards are intact before driving. Check whether the amount of oil in the lubrication system is sufficient. The fuel supply in the three direction feed boxes must not exceed half of the oil standard (note that the oil must not be allowed to flow to the motor).
2 The milling cutter, shank, workpiece and tool must be fastened.
3 The feed must be stopped in all directions before the spindle can be stopped.
4 When the operator leaves the machine, shifts the spindle, replaces the workpiece or tool. When adjusting the machine, you must stop first.
5 When loading and unloading workpieces, the operator must work closely with the crane driver and the cable operator. The hooks should be solid and reliable, and the workpieces should be solid and stable. When the two work at the same time, they must have a responsible command.
6 After the work is completed, all parts of the machine must be stopped to zero position, turn off the power, wipe the equipment.
2 The milling cutter, shank, workpiece and tool must be fastened.
3 The feed must be stopped in all directions before the spindle can be stopped.
4 When the operator leaves the machine, shifts the spindle, replaces the workpiece or tool. When adjusting the machine, you must stop first.
5 When loading and unloading workpieces, the operator must work closely with the crane driver and the cable operator. The hooks should be solid and reliable, and the workpieces should be solid and stable. When the two work at the same time, they must have a responsible command.
6 After the work is completed, all parts of the machine must be stopped to zero position, turn off the power, wipe the equipment.
1.8L Electric Kettle,Hot Water Kettle,Fellow Stagg Ekg,Electric Kettle 1.8 Litre
Aiosa , https://www.nbaiosa.com