Piston decompression valve assembly work procedures are generally: Prepare a cleaning check a color check a main valve installed a piston installed a pulse valve fitted with a spring loaded diaphragm installed a valve cover a quality inspection and other items (Note: Several working procedures in the middle can be adjusted according to the assembler's habits). Piston decompression 阕 its work content and technical requirements according to the provisions of Table 4.15, the main assembly precision assembly and surface roughness requirements shown in Figure 4.17. In addition, the spring diaphragm pressure reducing valve its operating principle and structure similar to the piston valve. The diaphragm in the spring membrane type pressure reducing valve is made of rubber, which is used to replace the diaphragm, the pulse valve and the piston in the piston type pressure reducing valve. Its structure is simpler. Spring diaphragm pressure reducing valve assembly program can follow the piston valve assembly process. program
Rare Earth Heat Reistant Steel Series
Nozzle unit, Adjust nozzle, Rotate nozzle, Wind box, Burner, Pipe clip, Primary air elbow
Jiangsu Taigoo New Material Co. Ltd. , https://www.spun-castings.com