When the floor heating system is used for the first time or for a long time, the floor temperature should be set to the lowest temperature, and then the temperature should be increased slowly. It is advisable to raise the temperature by 1°C per hour, so that the wooden floor can gradually adapt to the temperature rise. If the heating is too fast, it may cause the wooden floor to be heated too fast, resulting in unstable twisting and cracking changes, affecting the service life of the wooden floor.
1. Gradually warm up after installing for 24 hours. Be sure to keep the floor clean and dry before heating to prevent cracking and distortion of the floor due to excessive heating.
2. When using the floor heating system for the first time or for a long time, set the minimum temperature first, then slowly raise the temperature. It is advisable to raise the temperature by 1°C per hour, so that the wooden floor gradually adapts to the temperature rise. If the heating is too fast, it may cause the wooden floor to be heated too fast, resulting in unstable twisting and cracking changes, affecting the service life of the wooden floor.
3. As far as possible in the geothermal heating on the wooden floor as a fixed decoration or place no legless furniture, to prevent local heat is not smooth, heat boring in the wood floor, easy to produce uneven deformation of the floor due to heat.
4. Scientific maintenance: Can not suddenly rise. The cold winter usually has no room indoors, which can reduce heating and cooling, but it can't close the valve and must be controlled at 0°C or more.
Aluminum plate is the thickness of above 0.2mm to below 500mm, more than 200mm width, length within 16m aluminum material called aluminum plate or aluminum sheet, below 0.2mm for aluminum,200mm width within the bar or bar (of course, with the progress of large equipment, the widest can do 600mm aluminum plate is also more).
Aluminum plate refers to the rectangular plate made of aluminum ingot rolling, which is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium thick aluminum plate and pattern aluminum plate.
Aluminum plate is usually divided into the following two types:
1. According to the alloy composition:
High purity aluminum sheet (rolled from high purity aluminum with content above 99.9)
Pure aluminum plate (basically made of rolled pure aluminum)
Alloy aluminum plate (composed of aluminum and auxiliary alloys, usually aluminum Copper, aluminum manganese, aluminum silicon, aluminum magnesium, etc.)
Composite aluminum plate or brazed plate (special purpose aluminum plate material obtained by means of composite of multiple materials)
Aluminum clad aluminum sheet (aluminum sheet coated with thin aluminum sheet for special purposes)
2. Divided by thickness :(unit mm)
aluminum sheet (aluminum sheet) 0.15-2.0
Conventional plate (aluminum sheet) 2.0-6.0
Medium plate (aluminum plate) 6.0-25.0
Thick plate (aluminum plate) 25-200 super thick plate more than 200
Drawing aluminum plate: The manufacturing process of repeatedly using sandpaper to scrape the aluminum plate out of the line, the main process is divided into three parts: deester, sand mill, washing. In the drawing process of aluminum plate, the special skin film technology after anode treatment can generate a skin film containing the metal composition on the surface of aluminum plate, and clearly show each fine wire trace, so that the fine hair luster in the metal matte.
Aluminum oxide plate: aluminum plate is placed in the corresponding electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.) as the anode, under specific conditions and external current, electrolytic aluminum plate formed. The anodic aluminum plate is oxidized to form a thin layer of alumina on the surface, the thickness of which is 5 ~ 20 microns, and the hard anodic oxide film can reach 60 ~ 200 microns.
PS aluminum plate (advertising aluminum plate, also known as printing zinc plate, newspaper plate) : that is, on the back of the printing pattern thickness of 025 or 03 materials of aluminum plate.
Mirror aluminum plate: refers to the aluminum plate treated by rolling, grinding and other methods, so that the surface of the plate presents the mirror effect.
Embossed aluminum plate can also be called aluminum embossed plate: on the basis of aluminum plate, after calendering and forming a variety of patterns on the surface of the aluminum products, widely used, mainly in packaging, construction, curtain wall and other aspects.
Aluminium plate,Aluminium sheet,Aluminum Alloy Plate,aluminium checkered plate
Shandong Longhao Steel Group Co., Ltd. , https://www.longhaosteels.com