DH Series Dry Roll Press Granulator

       Our company  offers a wide range of machine sizes for high pressure granulating, which covers nearly all requirements of the clients.If your production is low,you can choose small type machine, if you have high production, you can choose one or more sets of machines according to your requirements.And certainly the process of granulating is dry.          Raw materials are sent into hopper by quantitative feeder, compactors use the pair of roller with the hole roll, leaving certain gap and rotation with the same speed reversely. Shaft holders of one group of rolls are fixed, and the other one of group can slide to help the hydraulic cylinder press the rolls for abutting closely against each other. Many arc grooves with the same shape and size are arrayed regularly on the roll surface. In accordance with different compressing ratios of target materials, the wave though of arc groove of one roll shall be directed at that of one roll. When two rolls parallel each other horizontally, powder grained materials are, continuously and evenly fed in the gap between two rolls by means of their gravities and through a forced charger from above of two rolls. After entering the nip area, the materials are gradually nipped by the rolls. With continuous rotation of the rolls, the space that the materials occupy reduces gradually and is compressed step by step and reaches the maximum shaping pressure. And then, as the pressure reduces gradually later, pressed blocks drop off the arc grooves of the rolls for recovered elasticity and gravity of the flaking machine and enter a crushing device for crushing and then enter a sieving device for sieving. At last, grained products are obtained. The powder materials and large particles which are substandard will return to bucket elevator and enter into the next process with new products.

Features

Granular strength can be adjusted by adjusting the pressure of roller, control strength of final products.

1. Cycle operations to achieve continuous production. High yield of Finished Products.

2. Materials are force to compress molding by mechanical pressure, without any additives, the product's purity is guaranteed.

3. Dry powders are granulated directly without follow-up drying process, the existing production process is easy to convergence & transformation.

4. Granular strength is high, compared with other granulating methods, the improvement sof bulk density are significant,especially for the occasion where increase the proportion of product accumulation.

5. A wide range of raw materials can be used, granular strength can be freely adjusted according to different materials.

6. Compact structure, easy maintenance, simple operation, short process, low energy consumption, high efficiency, low failure rate. 

7. Control environmental pollution, reduce waste and powder packaging costs, and improve product transport capacity.

8. Feeding device adopts frequency adjustment control, high automation ,one can control multi-machine, low labor intensity and long term continuous operation,etc.

9. Major transmission components use high quality alloy material. Stainless steel, titanium, chromium and other surface alloys which greatly improved wear resistance, corrosion resistance, high temperature and pressure capabilities, so that this machine has one long service life.

    

Applied materials:

1.Pre-feeder
  Equipped with mechanical vibrating feed hopper with automatic control and timing vibration.  
2.Quantitative feeder
  Adopts frequency conversion adjusting speed to ensure the feeding accuracy. 
3.Force-feeding screw hopper
  It is composed of variable frequency motor, cone helix, stirring knife tooth and cone feeding hopper with visual glass window as well as feeding mouth assemblies and so on. Its function is to further achieve degassing and perform pressure feeding.
4.Flaking machine
  It is composed of left and right fixed bearing seats, frame structure, two alloy steel rollers, two hydraulic oil cylinders, electric automatic pump station as well as hard tooth surface dedicated reducer and main driving motor.
5.Crushing & granulating machine
  It is composed of cutting-up box, cutting-up main shaft and special rotating cutting blades and the main shaft is driven at high speed by the motor to break the extrusion forming materials and dress into pellets.
6.Vibration screen
  It is equipped with screen block-proof device and convenient to clean the screen. The broken pellet and powder materials from the breaking and dressing machine is divided into pellet product and recycling powder.
7.Material return auger
  It sends the unaccepted powder material returned from vibration classification screen to the feeding elevator.
8.Bucket elevator
  Upper and lower sprocket use assembly structure for the transportation of materials.
9.Control cabinet
  It is composed of the electrical components such as electric control box, frequency conversion controller, ammeter, voltage meter, light, button switches, voltage switch and so on. All the electrical equipment is controlled and operated concentratedly.

Services

       Our services cover material tests, process layout, engineering, and supply of complete granulating plants or key equipments, guidance of installation and commissioning, training. Also, the company manufactures and supplies equipment for drying equipments and dust collector machines. 

We welcome customers to visit our factory
 

Door Frame

With customized folding options, superior security and an easy to operate design. Maximize your entry space and create a seamless indoor-outdoor entertaining experience with our bi fold doors. Opening almost effortlessly along high-performance rollers. They are stylish, modern and practical.

Door Frame,Aluminium Door Panel,Knockdown Door Frame,Interior Door Frames

Huiye Hardware & Electrical Equipment Company Ltd. , https://www.jmhuiyehardware.com